Practice Exam Questions
663
31.
Which command provided the following output?
Serial0(out): StEnq, myseq 135, yourseen 134, DTE up
Serial0(in): Status, myseq 135
Serial1(out): StEnq, myseq 2, yourseen 8, DTE up
Serial1(in): Status, myseq 2
Serial2(out): StEnq, myseq 247, yourseen 247, DTE up
Serial2(in): Status, myseq 247
Serial3(out): StEnq, myseq 30, yourseen 28, DTE up
Serial3(in): Status, myseq 30
Serial0(out): StEnq, myseq 136, yourseen 135, DTE up
Serial0(in): Status, myseq 136
A.
show frame-relay pvc
B.
debug serial interface
C.
debug frame-relay
D.
show serial interface
32.
Which command provided the following output?
Serial0 is administratively down, line protocol is down
Hardware is HD64570
Internet address is 172.16.20.6/30
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely
255/ 255, load 1/255
Encapsulation HDLC, loopback not set, keepalive set
(10 sec)
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0 (size/max/drops); Total output
drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/
drops)
Conversations 0/0/256 (active/max active/max
total)
Reserved Conversations 0/0 (allocated/max
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com