normal operation, including the
frame traffic per port; the total
number of incoming frames,
including discards; and the total
number of transmits and aborts
due to excessive deferral or
MTU violations. Broadcast
counters are also maintained in
addition to discards due to
EARL page full errors.
VTP domain configured on the
switch. Note that VTP updates are
sent over VLAN 1 when
troubleshooting.
associated with the ports of the
switch. These addresses are stored
in the CAM table; this command
accesses that table.
tree process for each VLAN, when
spanning-tree has been enabled on
the switch.
installed software and the version
of code.
version numbers, in addition to
memory and system uptime
statistics.
status from the router.