Catalyst Troubleshooting Tools
587
show flash
Cisco switches operate with software that is very similar to the Cisco IOS on
routers. This software is stored and may be upgraded in flash stored on the
Supervisor module. The show flash command reports the space required
for the installed software and the version of code.
Switch_A> (enable) show flash
File Version Sector Size Built
c5000 nmp 3.2(1b) 02-11 1571059 05/04/98 22:37:19
epld 3.2 30 72920 05/04/98 22:37:23
lcp atm 3.2(1) 12-15 23822 05/04/98 15:29:01
lcp tr 3.2 12-15 29016 05/04/98 15:30:46
lcp c5ip 3.2 12-15 23744 05/04/98 15:33:40
lcp 64k 3.2 12-15 57046 05/04/98 15:32:12
atm/fddi 3.2 12-15 24507 05/04/98 15:27:10
lcp 360 3.2(1) 12-15 123108 05/04/98 15:37:04
lcp 3.2 12-15 27561 05/04/98 15:25:48
smcp 3.2 12-15 34155 05/04/98 15:22:38
mcp 3.2 12-15 26378 05/04/98 15:24:20
show version
The show version command provides hardware and software version numbers,
in addition to memory and system uptime statistics. The output of the command
appears as follows:
Switch_A> (enable) show version
WS-C5505 Software, Version McpSW: 3.2(1) NmpSW: 3.2(1b)
Copyright (c) 1995-1998 by Cisco Systems
NMP S/W compiled on May 4 1998, 15:20:25
MCP S/W compiled on May 04 1998, 15:22:38
System Bootstrap Version: 3.1(2)
Hardware Version: 1.0 Model: WS-C5505 Serial #: 066911349
Module Ports Model Serial # Hw Fw Fw1 Sw
1 2 WS-X5506 009071826 2.3 3.1(2) 2.4(1) 3.2(1b)
2 24 WS-X5224 006711612 1.4 3.1(1) 3.2(1)
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com