background image
568
Chapter 11
Troubleshooting Switched Ethernet
A4: 103C182C, A5: 64000000, A6: 10FFFF8C, sp: 10FFFF6C
NVRAM log:
Module 2 Log:
Reset Count: 4
Reset History: Tue Sep 22 1998, 23:07:05
Thu Sep 17 1998, 11:29:27
Wed Sep 16 1998, 18:49:01
Mon Sep 14 1998, 12:19:05
Module 3 Log:
Reset Count: 4
Reset History: Tue Sep 22 1998, 23:07:05
Thu Sep 17 1998, 11:29:27
Wed Sep 16 1998, 18:49:01
Mon Sep 14 1998, 12:19:29
Module 4 Log:
Reset Count: 4
Reset History: Tue Sep 22 1998, 23:07:05
Thu Sep 17 1998, 11:29:27
Wed Sep 16 1998, 18:49:01
Mon Sep 14 1998, 12:19:30
show interface
The
show interface
command reports the IP configuration of the Supervisor
module. Although SLIP (serial line interface protocol) connection is configured
on sl0, most installations use the in-band sc0 connection. As shown, it belongs
to VLAN 1, which always exists on the switch.
Switch_A> (enable)
show interface
sl0: flags=51<UP,POINTOPOINT,RUNNING>
slip 0.0.0.0 dest 0.0.0.0
sc0: flags=63<UP,BROADCAST,RUNNING>
vlan 1 inet 10.11.10.1 netmask 255.255.255.0
broadcast 10.11.10.255
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com