The AppleTalk Protocol
543
AT: src=TokenRing0:1.230, dst=1-1, size=10, 0 rtes, RTMP
pkt sent
AT: Route ager starting on Main AT RoutingTable (2 active
nodes)
AT: Route ager finished on Main AT RoutingTable (2 active
nodes)
AT: RTMP from 1.87 (new 0,old 1,bad 0,ign 0, dwn 0)
AT: src=TokenRing0:1.230, dst=1-1, size=10, 0 rtes, RTMP
pkt sent
AT: Route ager starting on Main AT RoutingTable (2 active
nodes)
AT: Route ager finished on Main AT RoutingTable (2 active
nodes)
AT: RTMP from 1.87 (new 0,old 1,bad 0,ign 0, dwn 0)
AT: src=TokenRing0:1.230, dst=1-1, size=10, 0 rtes, RTMP
pkt sent
AT: Route ager starting on Main AT RoutingTable (2 active
nodes)
AT: Route ager finished on Main AT RoutingTable (2 active
nodes)
%AT-6-PATHNOTIFY: TokenRing0: AppleTalk RTMP path to 2-2
down; reported bad by 1.87
AT: RTMP from 1.87 (new 0,old 0,bad 0,ign 0, dwn 1)
AT: src=TokenRing0:1.230, dst=1-1, size=10, 0 rtes, RTMP
pkt sent
debug apple zip
As presented previously, zone updates are critical to the proper functioning of
AppleTalk networks. The debug apple zip command reports all ZIP packet
information in real time for troubleshooting zone problems. The following
output includes the response to a ZIP query on network 2-2. Note the "name
Two" entry within the output.
Router_C#debug apple zip
AppleTalk ZIP Packets debugging is on
AT: NextNbrZipQuery: [2-2] zoneupdate 0 gw: 1.87 n: 1.87
AT: NextNbrZipQuery: r->rpath.gwptr: 60C60D20, n: 60C60D20
AT: maint_SendNeighborQueries, sending 1 queries to 1.87
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com