The AppleTalk Protocol
541
Verification that the router's configuration matches the information
received from the previous requests; note that an error at this point
will result in a port configuration mismatch
Zone verification to confirm that the router's zone list is valid
Operational status and interface up
debug apple nbp
The debug apple nbp command should be used to confirm receipt of valid
NBP updates. This is usually warranted after a problem viewed with the
show appletalk nbp
command.
Router_A# debug apple nbp
AT: NBP ctrl = LkUp, ntuples = 1, id = 77
AT: 410.19, skt 2, enum 0, name: =:ciscoRouter@Lab
AT: LkUp =:ciscoRouter@Lab
AT: NBP ctrl = LkUp-Reply, ntuples = 1, id = 77
AT: 4160.154, skt 254, enum 1, name:
lestat.Ether0:ciscoRouter@Lab
AT: NBP ctrl = LkUp, ntuples = 1, id = 78
AT: 410.19, skt 2, enum 0, name: =:IPADDRESS@Lab
AT: NBP ctrl = LkUp, ntuples = 1, id = 79
AT: 410.19, skt 2, enum 0, name: =:IPGATEWAY@Lab
AT: NBP ctrl = LkUp, ntuples = 1, id = 83
AT: 410.19, skt 2, enum 0, name: =:ciscoRouter@Lab
AT: LkUp =:ciscoRouter@LabAT: NBP ctrl = LkUp, ntuples =
1, id = 84
AT: 410.19, skt 2, enum 0, name: =:IPADDRESS@Lab
AT: NBP ctrl = LkUp, ntuples = 1, id = 85
AT: 410.19, skt 2, enum 0, name: =:IPGATEWAY@Lab
AT: NBP ctrl = LkUp, ntuples = 1, id = 85
AT: 410.19, skt 2, enum 0, name: =:IPGATEWAY@Lab
debug apple packet
This command reports all inbound and outbound AppleTalk datagrams at the
router. Although this command can be very useful when troubleshooting, it is
recommended that care be used. A protocol analyzer may prove to be a more
useful diagnostic tool.
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com