532
Chapter 10
Troubleshooting AppleTalk Connectivity
DDP datagrams will be checksummed.
RTMP datagrams will be strictly checked.
RTMP routes may not be propagated without zones.
Routes will be distributed between routing protocols.
Routing between local devices on an interface will not
be performed.
IPTalk uses the udp base port of 768 (Default).
AppleTalk EIGRP is not enabled.
Alternate node address format will not be displayed.
Access control of any networks of a zone hides the zone.
show appletalk name-cache
The show appletalk name-cache displays a list of NBP services from other
AppleTalk routers and devices that support NBP. The output, as shown,
includes the network, address, socket information, and NBP type.
Router_C#show appletalk name-cache
AppleTalk Name Cache:
Net Adr Skt Name Type Zone
144 46 254 Router_C.FastEthernet0/0 ciscoRouter Dilbert
147 96 254 Router_C.Ethernet1/2 ciscoRouter Robert
148 252 254 Router_C.Ethernet4/5 ciscoRouter Piper
157 93 254 Router_C.Ethernet4/2 ciscoRouter Info
157 102 254 Router_A.Ethernet ciscoRouter Info
157 188 254 Router_B.Ethernet5 ciscoRouter Info
show appletalk traffic
The show appletalk traffic command summarizes all AppleTalk traffic
that enters or leaves the router--including erred packets, routing counters, and
broadcast information. This information can be very useful for obtaining a
quick overview of the state of the AppleTalk protocol. Although a baseline is
valuable for comparison, the counters presented in this command usually
present an indication of errors that need resolution.
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com