The AppleTalk Protocol
527
macip-servers Mac IP servers
macip-traffic Mac IP traffic
name-cache AppleTalk name cache
nbp AppleTalk NBP name table
neighbors AppleTalk Neighboring router status
remap AppleTalk remap table
route AppleTalk routing table
sockets AppleTalk protocol processing
information
static AppleTalk static table
traffic AppleTalk protocol statistics
zone AppleTalk Zone table information
show appletalk interface
The
show appletalk interface
command displays the interface status,
cable range, and network and node address, in addition to the zone name
and route cache status. In this example, the zone name is "one" and the inter-
face is 1.230. AppleTalk also verifies the configuration of the port--in this
case, router 1.87 performed this function.
Router_C#
show appletalk interface
TokenRing0 is up, line protocol is up
AppleTalk cable range is 1-1
AppleTalk address is 1.230, Valid
AppleTalk zone is "one"
AppleTalk port configuration verified by 1.87
AppleTalk address gleaning is disabled
AppleTalk route cache is enabled
Note that in troubleshooting, there may be cause to use the
clear
appletalk
commands, which includes the
clear appletalk interface
option. A list of the
clear appletalk
options is included as follows.
The
clear appletalk interface
command resets the specified interface(s),
disrupting connectivity.
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com