526
Chapter 10
Troubleshooting AppleTalk Connectivity
Protocol [ip]: apple
Target AppleTalk address: 1.87
Repeat count [5]:
Datagram size [100]:
Timeout in seconds [2]:
Verbose [n]: y
Sweep range of sizes [n]:
Type escape sequence to abort.
Sending 5, 100-byte AppleTalk Echos to 1.87, timeout is 2
seconds:
0 in 4 ms from 1.87 via 1 hop
1 in 4 ms from 1.87 via 1 hop
2 in 4 ms from 1.87 via 1 hop
3 in 4 ms from 1.87 via 1 hop
4 in 4 ms from 1.87 via 1 hop
Success rate is 100 percent (5/5), round-trip min/avg/max
= 4/4/4 ms
AppleTalk
show
Commands
As with other protocols, the Cisco IOS
show
commands provide a wealth of
information regarding AppleTalk, including routing, zone, and cache data. A
list of options is displayed as follows with the
show appletalk ?
command.
Many options have suboptions--use the
?
command to review further.
Router_C#
show appletalk ?
access-lists AppleTalk access lists
adjacent-routes AppleTalk adjacent routes
arp AppleTalk arp table
aurp AURP information
cache AppleTalk fast-switching cache
domain AppleTalk Domain(s) information
eigrp AppleTalk/EIGRP show commands
globals AppleTalk global parameters
interface AppleTalk interface status and
configuration
macip-clients Mac IP clients
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com