518
Chapter 9
Troubleshooting Novell Connectivity
Answers to Review Questions
1.
B. The correct command for server information is given by B.
2.
C. If there is no local server, the router will respond as the server. If
there is a local server, the router will not respond.
3.
A, C. Ethernet II and ARPA are synonymous. Novell calls it Ethernet
II while Cisco calls it ARPA. Therefore, the encapsulation is the same.
4.
D. Before a client can locate services, it needs to know where the serv-
ers are. This is done with the GNS request.
5.
A. The show ipx servers output provides specific enough informa-
tion that duplicate networks can be found.
6.
C. The default setting is 60 seconds.
7.
B. Somewhat similar to an IP RIP hop count, there is a 15-hop limit
with IPX RIP.
8.
C, D, E. TCP/IP and AppleTalk have nothing to do with SAP, and RIP
is compatible with TCP/IP and AppleTalk.
9.
B. This command provides the right network and mask.
10.
B. Since EIGRP is Cisco proprietary, it can only be on Cisco routers.
11.
A. This provides the correct syntax, network, and mask.
12.
E. Recall that access lists have implicit deny statements, therefore C
would block all IPX traffic.
13.
A, B, D, E. These are the valid criteria for extended access list filtering.
14.
C. 800899 is the defined range for standard IPX access lists.
15.
D. IPX does not use ARP.
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com