Troubleshooting Frame Relay
405
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 1023 LMI type is CISCO frame relay DTE
Broadcast queue 0/64, broadcasts sent/dropped 0/0,
interface broadcasts 36752578
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0 (size/max/drops); Total output
drops: 0
Queueing strategy: weighted fair
Output queue: 0/64/0 (size/threshold/drops)
Conversations 0/20 (active/max active)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 5000 bits/sec, 6 packets/sec
5 minute output rate 5000 bits/sec, 6 packets/sec
134880248 packets input, 102288228 bytes, 0 no buffer
Received 823910 broadcasts, 0 runts, 0 giants
1 input errors, 1 CRC, 0 frame, 0 overrun, 0 ignored,
1 abort
136835759 packets output, 3397101778 bytes, 0
underruns
0 output errors, 0 collisions, 14 interface resets
0 output buffer failures, 0 output buffers swapped
out
2 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
Router_A#show interface serial 0.2
Serial0.2 is up, line protocol is up
Hardware is HD64570
Internet address is 172.16.30.6/30
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/
255, load 1/255
Encapsulation FRAME-RELAY
Router_A#
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com