background image
TCP/IP Router Diagnostic Tools
309
Sent: 0 total
IP-IGRP2 statistics:
Rcvd: 402 total
Sent: 406 total
PIMv2 statistics: Sent/Received
Total: 0/0, 0 checksum errors, 0 format errors
Registers: 0/0, Register Stops: 0/0
IGMP statistics: Sent/Received
Total: 0/0, Format errors: 0/0, Checksum errors: 0/0
Host Queries: 0/0, Host Reports: 0/0, Host Leaves: 00
DVMRP: 0/0, PIM: 0/0
ARP statistics:
Rcvd: 0 requests, 0 replies, 0 reverse, 0 other
Sent: 1 requests, 5 replies (0 proxy), 0 reverse
Router_B#
show ip route
This command returns information stored in the IP
route table. The command can be issued as a general command, and all IP
routes and corresponding information will be displayed. Additionally, a
given network may be specified, and the command will return informa-
tion regarding that network only. Here are two samples. Notice that the
two outputs are different. The general command provides summary infor-
mation for every IP route in the route table. However, when a network is
specified, the results are much more detailed. Information such as the
exact routing protocol responsible for learning the route, the source inter-
face, and the next hop router's IP address is all included.
Router_A>sho ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M -
mobile, B - BGP
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com