background image
Commands Used in This Chapter
229
Command
Description
show processes cpu
Displays the router's processes and
the percentage of CPU utilization
over 5 seconds, 1 minute, and 5
minutes.
show processes memory
Displays the router's processes and
the amount of memory allocated to
each.
show queue
Displays interface-specific queuing
information.
show queueing
Displays the configuration of
queuing on the router.
show running-config
Displays the current configuration
that is loaded into memory.
show stacks
Displays the router's stack
information.
show startup-config
Displays the configuration version
that is saved in NVRAM.
show tech-support
A comprehensive command that
includes show running-config,
show version
, show stacks, show
processes cpu
, and show
processes memory
, along with
many others.
show version
Displays the version of IOS, the
reason for last reload, and the
router's hardware configuration.
terminal monitor
Enables the router to echo console
message to the active TTY port.
This facilitates the debug tool.
terminal no monitor
Disables the echo.
traceroute
A hop-by-hop ICMP traceroute.
This command has two levels, User
and Privileged.
un all
Turns off all possible debugging.
write core
Initiates a core dump to the
specified host.
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com