Troubleshooting Commands
221
Sending 5, 100-byte IPX cisco Echoes to
C082B2B9.1171.587d.58fb, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max
= 8/10/12 ms
Router_C#
Router_C#ping
Protocol [ip]: ipx
Target IPX address: C082B2B9.1171.587d.58fb
Repeat count [5]:
Datagram size [100]:
Timeout in seconds [2]:
Verbose [n]: y
Novell Standard Echo [n]:
Type escape sequence to abort.
Sending 5, 100-byte IPX cisco Echoes to
C082B2B9.1171.587d.58fb, timeout is 2 seconds:
0 in 12 ms
1 in 12 ms
2 in 12 ms
3 in 12 ms
4 in 12 ms
Success rate is 100 percent (5/5), round-trip min/avg/max
= 12/12/12 ms
Router_C#
If you answer yes to the Novell Standard Echo prompt, then Novell boxes
can respond to the ping. The second ping is different from the first because the
verbose option was selected. It displays the RTT for each packet separately.
AppleTalk
The extended options for AppleTalk are the same. The following dialog
depicts the AppleTalk ping options:
Router_C#ping
Protocol [ip]: appletalk
Target AppleTalk address: 1.112
Repeat count [5]:
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com