Chapter 11 675
14
Which processor do the 2600 and 3600 routers use?
The RISC processor.
15
What is the Stack Group Bidding Protocol?
It is a protocol used between access servers to determine who should do the processing for
remote-access connections.
16
Is a four-wire 64k circuit full duplex or half duplex?
Full duplex.
17
Would a 2500 series router be a TE1 or a TE2?
TE2. TE2 devices have no ISDN hardware and need a terminal adapter.
18
A PBX is which type, NT1 or NT2?
NT2.
19
What reference point interface connects to the local loop?
The U interface.
20
Name at least three protocols that can be used over PPP.
IP, IPX, AppleTalk.
21
Does MLPPP provide for load balancing?
Yes.
22
What are the pinouts of a 64k circuit used with an RJ-45?
Pins 1, 2, 7, and 8.
23
What processor does the Cisco 2500 series use?
The Motorola processor.
24
What is one of the primary differences between the AS5200 and the AS5300?
The 5300 can be used as a VoIP gateway.
25
Which router would you use to meet the following requirements: ten users at a branch
office, multiservice, voice/data integration, VPNs, and broadband access?
The Cisco 1720 or 1750 would meet these needs.
26
Into what slot would an RSP8 module fit in a Cisco 7500 router?
The processor slot.
27
Which series of routers has a totally different OS than the other routers?
The 700 series was purchased from a company called Combinet and has a completely
different OS.
87200333.book Page 675 Wednesday, August 22, 2001 1:41 PM