Chapter 8 665
Chapter 8
1
In what situations is AppleTalk recommended?
AppleTalk is recommended when the goal is to design a small network to support Apple
computers that is easy to use, configure, and maintain.
2
Name two AppleTalk protocols that operate at the network layer.
AppleTalk Address Resolution Protocol (AARP).
Datagram Delivery Protocol (DDP).
3
What three elements comprise an AppleTalk network address?
Network number, node number, socket number.
4
What method of AppleTalk configuration is recommended for LAN networks?
Soft seed.
5
Name three protocols that are used for AppleTalk routing.
AppleTalk Update-Based Routing Protocol (AURP).
Routing Table Maintenance Protocol (RTMP).
Enhanced Interior Gateway Routing Protocol (EIGRP).
6
What two elements comprise a Novell network address?
Network number and node number.
7
What routing protocol should be used on the WAN to conserve bandwidth?
Enhanced Interior Gateway Routing Protocol (EIGRP).
8
What is one method of controlling SAP and RIP broadcasts on the network?
SAP and RIP broadcasts can be controlled with access lists.
9
True or false: IPX clients on the network must have a dialup modem or have IP enabled
on their workstations to access the Internet.
False. An IPX-to-IP gateway can be configured. All IPX clients can access the Internet
through the gateway.
10
What are the Novell and Cisco definitions for the four types of IPX encapsulation for
Ethernet?
Ethernet 802_3 __________________________________________________________
Novell-ether.
Ethernet_SNAP _________________________________________________________
SNAP.
87200333.book Page 665 Wednesday, August 22, 2001 1:41 PM