4-48
Cisco AVVID Network Infrastructure Enterprise Quality of Service Design
956467
Chapter 4 QoS in an AVVID-Enabled Wide-Area Network
Verifying QoS
show atm pvc
This example is the output of an ATM PVC configuration. In this example, you will note that:
·
The TX ring limit is set to 3.
WAN-AGG-7200#show atm pvc 0/600
ATM3/0.60: VCD: 2, VPI: 0, VCI: 600, Connection Name: BRANCH60-VOICE
VBR-NRT, PeakRate: 256, Average Rate: 256, Burst Cells: 94
AAL5-LLC/SNAP, etype:0x0, Flags: 0x20, VCmode: 0x0
OAM frequency: 0 second(s), OAM retry frequency: 1 second(s)
OAM up retry count: 3, OAM down retry count: 5
OAM Loopback status: OAM Disabled
OAM VC state: Not Managed
ILMI VC state: Not Managed
VC TxRingLimit: 3 particles
VC Rx Limit: 18 particles
InARP frequency: 15 minutes(s)
Transmit priority 4
InPkts: 0, OutPkts: 110674, InBytes: 0, OutBytes: 88317056
InPRoc: 0, OutPRoc: 0
InFast: 0, OutFast: 110674, InAS: 0, OutAS: 0
InPktDrops: 0, OutPktDrops: 10628/0/10628 (holdq/outputq/total)
CrcErrors: 0, SarTimeOuts: 0, OverSizedSDUs: 0, LengthViolation: 0, CPIErrors: 0
Out CLP=1 Pkts: 0
OAM cells received: 0
F5 InEndloop: 0, F5 InSegloop: 0, F5 InAIS: 0, F5 InRDI: 0
F4 InEndloop: 0, F4 InSegloop: 0, F4 InAIS: 0, F4 InRDI: 0
OAM cells sent: 0
F5 OutEndloop: 0, F5 OutSegloop: 0, F5 OutRDI: 0
F4 OutEndloop: 0, F4 OutSegloop: 0, F4 OutRDI: 0
OAM cell drops: 0
Status: UP