Commands in This Study Guide
663
Command
Description
Chapter
interface serial 5
Puts you in configuration mode for
interface serial 5 and can be used for show
commands
4
ip access-group
Applies an IP access list to an interface
9
ip address
Sets an IP address on an interface or a
switch
4, App. B
ip classless
A global configuration command used to
tell a router to forward packets to a default
route when the destination network is not in
the routing table
5
ip default-gateway
Sets the default gateway of the switch
App. B
ip domain-lookup
Turns on DNS lookup (which is on by
default)
7
ip domain-name
Appends a domain name to a DNS lookup
7
ip host
Creates a host table on a router
7
ip name-server
Sets the IP address of up to six DNS servers
7
IP route
Creates static and default routes on a router
5
ipx access-group
Applies an IPX access list to an interface
9
ipx input-sap-filter
Applies an inbound IPX SAP filter to an
interface
9
ipx network
Assigns an IPX network number to an
interface
8
ipx output-sap-filter
Applies an outbound IPX SAP filter to an
interface
9
ipx ping
A Packet Internet Groper used to test IPX
packet on an internetwork
8
ipx routing
Turns on IPX routing
8
isdn spid1
Sets the number that identifies the first DS0
to the ISDN switch
10
isdn spid2
Sets the number that identifies the second
DS0 to the ISDN switch
10
Copyright ©2002 SYBEX, Inc., Alameda, CA
www.sybex.com