Commands Used in This Appendix
633
Define the port duplex of a port, with full or half duplex.
Verify the configuration with the show running-config command.
Manage the MAC address table with the show mac-address-table
command.
Set permanent and static MAC addresses with the mac-address-
table
command.
Configure port security with the port secure command.
Key Terms
T
he following terms were important for this appendix:
Commands Used in This Appendix
T
he following list contains a summary of all the commands used in this
appendix:
auto duplex
set-based
dynamic entries
sticky-learns
port security
subinterfaces
Command
Description
clear mac-address-table
Clears the filter table created dynamically by
the switch
config t
Puts the switch into global configuration mode
delete nvram
Deletes the configuration of the switch
delete vtp
Deletes VTP configurations from a switch
description
Sets a description on an interface
duplex
Sets the duplex of an interface
enable password level 1
Sets the user-mode password
enable password level 15
Sets the enable-mode password
Copyright ©2002 SYBEX, Inc., Alameda, CA
www.sybex.com