588
Appendix A
Introduction to the Cisco IOS: Hands-on Labs
Router#sh int ?
Ethernet IEEE 802.3
Null Null interface
Serial Serial
accounting Show interface accounting
crb Show interface routing/bridging info
irb Show interface routing/bridging info
<cr>
4.
You can be specific with the command and use show interface
ethernet
0 or serial 0.
Router#sh int e0
Ethernet0 is up, line protocol is up
Hardware is Lance, address is 0010.7b7f.c26c (bia
0010.7b7f.c26c)
Internet address is 172.16.10.1/24
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set, keepalive set
(10 sec)
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:08:23, output 00:08:20, output hang
never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
25 packets input, 2459 bytes, 0 no buffer
Received 25 broadcasts, 0 runts, 0 giants, 0
throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0
ignored, 0 abort
0 input packets with dribble condition detected
33 packets output, 7056 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
Copyright ©2002 SYBEX, Inc., Alameda, CA
www.sybex.com