568
Chapter 10
Wide Area Networking Protocols
11.
config t
int bri0
dialer string 8358662
12.
config t
int bri0
dialer load-threshold 125 either
dialer idle-timeout 180
13.
config t
int bri0
hold-queue 75 in
14.
These are the steps you should take to configure the dialer information:
1.
Choose the interface.
2.
Set the IP address.
3.
Configure the encapsulation type.
4.
Link interesting traffic to the interface.
5.
Configure the number or numbers to dial.
15.
These are the steps that DDR follows when an interesting packet is
received in a router interface:
1.
Route to the destination network is determined.
2.
Interesting packets dictate a DDR call.
3.
Dialer information is looked up.
4.
Traffic is transmitted.
5.
Call is terminated when no more traffic is being transmitted over
a link and the idle-timeout period ends.
Copyright ©2002 SYBEX, Inc., Alameda, CA
www.sybex.com