Hands-on Labs
557
9.
Set the dialer load-threshold and multilink commands, as well
as the idle-time percentage on both 804 routers.
804A#config t
804A(config)#int bri0
804B(config-if)#dialer load-threshold 125 either
804B(config-if)#dialer idle-timeout 180
804B#config t
804B(config)#int bri0
804B(config-if)#dialer load-threshold 125 either
804B(config-if)#dialer idle-timeout 180
10.
Set the hold queue for packets when they are found interesting and
need a place to wait for the ISDN link to come up.
804A#config t
804A(config)#int bri0
804B(config-if)#hold-queue 75 in
804B#config t
804B(config)#int bri0
804B(config-if)#hold-queue 75 in
11.
Verify the ISDN connection.
ping
telnet
show dialer
show isdn status
sh ip route
Copyright ©2002 SYBEX, Inc., Alameda, CA
www.sybex.com