Written Lab 9
485
Written Lab 9
I
n this section, write the answers to the following questions:
1.
Configure a standard IP access list to prevent all machines on network
172.16.0.0 from accessing your Ethernet network.
2.
Apply the access list to your Ethernet interface.
3.
Create an access list that denies host 196.22.15.5 access to your Ethernet
network.
4.
Write the command to verify that you've entered the access list correctly.
5.
Write the two commands that verify the access list was properly
applied to the Ethernet interface.
6.
Create an extended access list that stops host 172.16.10.1 on Ethernet 0
from telnetting to host 172.16.30.5 on Ethernet 1.
7.
Apply the access list to the correct interface.
8.
Configure an IPX SAP access list that prevents any file service SAP
messages other than those from IPX address 45.0000.0000.0001 from
leaving the Ethernet 0 network.
9.
Apply the IPX SAP access list to the Ethernet interface.
(The answers to Written Lab 9 can be found following the answers to the
Review Questions for this chapter.)
Command
Description
show access-list 110
Shows only access list 110
show ip access-list
Shows only the IP access lists
show ip interface
Shows which interfaces have IP access lists
applied
show ipx access-list
Shows the IPX access lists configured on a
router
show ipx interface
Shows which interfaces have IPX access lists
applied
Copyright ©2002 SYBEX, Inc., Alameda, CA
www.sybex.com