446
Chapter 8
Configuring Novell IPX
Commands Used in This Chapter
T
he following list contains a summary of all the commands used in this
chapter:
Written Lab 8
W
rite out the answers to the following IPX-related questions.
1.
Write the command that lets you view your configured routed proto-
cols on your router.
Command
Description
debug ipx
Shows the RIP and SAP information as it passes
through the router.
encapsulation
Sets the frame type used on an interface.
int e0.10
Creates a subinterface.
ipx network
Assigns an IPX network number to an interface.
ipx ping
A Packet Internet Groper used to test IPX packet on
an internetwork.
ipx routing
Turns on IPX routing.
secondary
Adds a second IPX network on the same physical
interface.
show
ipx interface
Shows the RIP and SAP information being sent and
received on an individual interface. Also shows the
IPX address of the interface.
show ipx route
Shows the IPX routing table.
show ipx servers
Shows the SAP table on a Cisco router.
show ipx traffic
Shows the RIP and SAP information sent and
received on a Cisco router.
show protocols
Shows the routed protocols and the addresses on
each interface.
Copyright ©2002 SYBEX, Inc., Alameda, CA
www.sybex.com