444
Chapter 8
Configuring Novell IPX
You can also use an extended ping, which has more capabilities than a
standard ping.
RouterC#ping
Protocol [ip]: ipx
Target IPX address: 40.0000.0c8d.5c9d
Repeat count [5]:
Datagram size [100]:
Timeout in seconds [2]:
Verbose [n]:
Novell Standard Echo [n]: y
Type escape sequence to abort.
Sending 5, 100-byte IPX Novell Echoes to
40.0000.0c8d.5c9d, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max
= 4/7/12 ms
Summary
I
n this chapter, we covered the following points:
The required IPX address and encapsulation types and the frame types
that Cisco routers can use when running IPX.
How to enable the Novell IPX protocol and configure router inter-
faces. We talked about and gave examples of how to configure IPX on
Cisco routers and its interfaces.
How to monitor the Novell IPX operation on the router. We covered
some basic tools for monitoring IPX on your routers.
The two parts of network addressing and these parts in specific pro-
tocol address examples.
The IPX host address and the different parts of this address.
Copyright ©2002 SYBEX, Inc., Alameda, CA
www.sybex.com