436
Chapter 8
Configuring Novell IPX
show ipx interface
show protocol
debug ipx
IPX ping
The Show IPX Servers Command
The show ipx servers command is a lot like the display servers com-
mand in NetWare--it displays the contents of the SAP table in the Cisco
router, so you should see the names of all SAP services here. Remember that
if the router doesn't have entries for remote servers in its own SAP table,
local clients will never see those servers. If there are servers missing from this
table that shouldn't be, double check your IPX network addresses and
encapsulation settings.
2501A#sho ipx servers
Codes: S - Static, P - Periodic, E - EIGRP, N - NLSP,
H - Holddown, + = detail
9 Total IPX Servers
Table ordering is based on routing and server info
Type Name Net Address Port Route Hops Itf
P 4 BORDER1 350ED6D2.0000.0000.0001:0451 2/01 1 Et0
P 4 BORDER3 12DB8494.0000.0000.0001:0451 2/01 1 Et0
P 107 BORDER1 350ED6D2.0000.0000.0001:8104 2/01 1 Et0
P 107 BORDER3 12DB8494.0000.0000.0001:8104 2/01 1 Et0
P 26B BORDER 350ED6D2.0000.0000.0001:0005 2/01 1 Et0
P 278 BORDER 12DB8494.0000.0000.0001:4006 2/01 1 Et0
P 278 BORDER 350ED6D2.0000.0000.0001:4006 2/01 1 Et0
P 3E1 BORDER1 350ED6D2.0000.0000.0001:9056 2/01 1 Et0
P 3E1 BORDER3 12DB8494.0000.0000.0001:9056 2/01 1 Et0
The output from the router allows you to see all the IPX servers discov-
ered through the SAP advertisements.
The Type field is the type of SAP service being advertised, with 4 being a
file service and 7 a print service. The other service numbers listed are specific
for that type of application running on the NetWare server. The Net and
Address
fields are the IPX Internal network numbers configured on each
Copyright ©2002 SYBEX, Inc., Alameda, CA
www.sybex.com