426
Chapter 8
Configuring Novell IPX
Configuring IPX on the 2501A Router
The same commands are used on the 2501A router as on the 2621A router.
However, the 2501A router has two connections into the internetwork:
interface Ethernet 0 is on IPX network 10 and interface serial 0 is on IPX
network 20.
Here is the configuration for the 2501A router:
2501A(config)#ipx routing
2501A(config)#int e0
2501A(config-if)#ipx network 10
2501A(config-if)#int s0
2501A(config-if)#ipx network 20
That's all you need to do to configure IPX on the 2501A router. Much
easier than IP, isn't it?
Configuring IPX on the 2501B Router
To configure IPX routing on the 2501B router, you need to configure three
interfaces: interface Ethernet 0 is on network 30, interface serial 0 is on IPX
network 20, and interface serial 1 is on network 40.
Here is the configuration for the 2501B router:
2501B(config)#ipx routing
2501B(config)#int e0
2501B(config-if)#ipx network 30
2501B(config-if)#int s0
2501B(config-if)#ipx network 20
2501B(config-if)#int s1
2501B(config-if)#ipx network 40
That is all you need to do to configure IPX on the 2501B router.
Configuring IPX on the 2501C Router
To configure IPX routing on the 2501C router, you need to configure interface
Ethernet 0 into IPX network 50 and interface serial 0 into IPX network 40.
Here is the configuration for the 2501C router:
2501C(config)#ipx routing
2501C(config)#int e0
Copyright ©2002 SYBEX, Inc., Alameda, CA
www.sybex.com