372
Chapter 7
Managing a Cisco Internetwork
Interface: Serial0, Port ID (outgoing port): Serial0
Holdtime : 154 sec
Version :
Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-J-L), Version 11.1(5),
RELEASE SOFTWARE (fc1)Copyright (c) 1986-1996 by cisco
Systems, Inc.Compiled Mon 05-Aug-96 11:48 by mkamson
Todd2509#
The output above shows the hostname and IP address of the directly con-
nected devices. In addition to the same information displayed by the show
cdp
neighbor command (see Table 7.5), the show cdp neighbor detail
command shows the IOS version of the neighbor device.
The show cdp entry * command displays the same information as the
show
cdp neighbor details command. The following is an example of the
router output of the show cdp entry * command.
Todd2509#sh cdp entry *
-------------------------
Device ID: 1900Switch
Entry address(es):
IP address: 0.0.0.0
Platform: cisco 1900, Capabilities: Trans-Bridge Switch
Interface: Ethernet0, Port ID (outgoing port): 2
Holdtime : 223 sec
Version :
V9.00
-------------------------
Device ID: 2501B
Entry address(es):
IP address: 172.16.10.2
Platform: cisco 2500, Capabilities: Router
Interface: Serial0, Port ID (outgoing port): Serial0
Holdtime : 151 sec
Version :
Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-J-L), Version 11.1(5),
RELEASE SOFTWARE (fc1)Copyright (c) 1986-1996 by cisco
Systems, Inc.Compiled Mon 05-Aug-96 11:48 by mkamson
Todd2509#
Copyright ©2002 SYBEX, Inc., Alameda, CA
www.sybex.com