364
Chapter 7
Managing a Cisco Internetwork
start
command, you will be prompted to do so, since the router needs
to reboot.
Erase flash device before writing? [confirm][Enter]
Flash contains files. Are you sure you want to erase?
[confirm][Enter]
System configuration has been modified. Save? [yes/no]: y
Building configuration...
[OK]
Copy 'c2500-js56i-l.120-9.bin' from server
as 'c2500-js56i-l.120-9.bin' into Flash WITH erase?
[yes/no] y
After you say Yes to erasing flash memory, the router must reboot to load
a small IOS from ROM memory. You cannot delete the flash file if it is in use.
Then the contents of flash memory are erased, and the file from the TFTP
host is accessed and copied to flash memory.
%SYS-5-RELOAD: Reload requested
%FLH: c2500-js56i-l.120-9.bin from 192.168.0.120 to flash
...
System flash directory:
File Length Name/status
1 8121000 /c2500-js-l.112-18
[8121064 bytes used, 8656152 available, 16777216 total]
Accessing file 'c2500-js56i-l.120-9.bin' on 192.168.0.120
...
Loading c2500-js56i-l.120-9.bin .from 192.168.0.120
(via Ethernet0): ! [OK]
Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeee
Loading c2500-js56i-l.120-9.bin from 192.168.0.120
(via Ethernet0):
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! [output cut]
Copyright ©2002 SYBEX, Inc., Alameda, CA
www.sybex.com