Review Questions
345
A.
ISL
B.
VTP
C.
802.1Q
D.
802.3Z
23.
You have two switches connected with a trunked link running two
VLANs. VLAN1 is assigned to ports 1 through 3 of each switch and
VLAN2 has been assigned port 8 through 12 of each switch. HostA
and HostB are in VLAN1. HostG and HostH are in VLAN2. There is
no inter-VLAN routing. What should you do to verify proper VLAN
and trunk operations? (Choose three.)
A.
Verify that HostA can ping HostB.
B.
Verify that HostA can ping HostG.
C.
Verify that HostG can ping HostH.
D.
Verify that HostG cannot ping HostA.
E.
Verify that HostA cannot ping HostB.
24.
You need to add a new VLAN named ROUTERSIM to your switched
network. Which of the following are true regarding configuration of
this VLAN? (Select all that apply.)
A.
You must name the VLAN.
B.
You must assign ports on a switch for this VLAN.
C.
You must add this VLAN to the VTP domain.
D.
The VLAN must be created.
E.
You must add an IP address for the ROUTERSIM VLAN.
25.
Which of the following protocols is used to exchange VLAN configu-
ration information between switches?
A.
802.10
B.
VLAN Trunking Protocol (VTP)
C.
Inter-Switch Link (ISL)
D.
802.1Q
Copyright ©2002 SYBEX, Inc., Alameda, CA
www.sybex.com