background image
308
Chapter 5
IP Routing
Notice that this shows you your RIP and IGRP routing protocols and
the update timers.
sh ip route
This should let you see all five subnets: 10, 20, 30, 40, and 50. Some
will be directly connected, and some will be I routes, which are IGRP-
injected routes. RIP is still running, but if you look at the routing table,
you'll notice the network entry has a network number (100/23456).
The first number (100) is the trustworthiness rating. Since RIP's
default trustworthiness rating is 120, the IGRP route is used before a
RIP route is used. The second number is the metric, or weight, of the
route that is used to determine the best path to a network.
show running-config
This lets you see that RIP and IGRP are configured.
9.
To save your configurations, type copy running-config startup-
config
or copy run start and press Enter at each router.
10.
Verify the network by pinging all routers, switches, and hosts.
Copyright ©2002 SYBEX, Inc., Alameda, CA
www.sybex.com