Verifying Your Configurations
293
C 172.16.30.0 is directly connected, Ethernet0
C 172.16.20.0 is directly connected, Serial0
I 172.16.10.0 [100/158350] via 172.16.20.1,
00:00:36, Serial0
2501B#
The following router output shows the 2501C routing table.
2501C#sh ip route
[output cut]
172.16.0.0/24 is subnetted, 5 subnets
C 172.16.50.0 is directly connected, Ethernet0
C 172.16.40.0 is directly connected, Serial0
I 172.16.30.0 [100/8576] via 172.16.40.1,
00:00:28, Serial0
I 172.16.20.0 [100/160250] via 172.16.40.1,
00:00:28, Serial0
I 172.16.10.0 [100/160350] via 172.16.40.1,
00:00:28, Serial0
2501C#
Verifying Your Configurations
I
t is important to verify your configurations once you have completed
them, or at least, once you think you have completed them. The following
list includes the commands you can use to verify the routed and routing pro-
tocols configured on your Cisco routers. The first command was covered in
the previous section; the others are covered in upcoming sections.
show ip route
show protocols
show ip protocol
debug ip rip
debug ip igrp events
debug ip igrp transactions
Copyright ©2002 SYBEX, Inc., Alameda, CA
www.sybex.com