Command-Line Interface
225
Hardware is HD64570
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation HDLC, loopback not set, keepalive set
(10 sec)
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored,
0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 16 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=down DSR=down DTR=down RTS=down CTS=down
Router#clear counters ?
Ethernet IEEE 802.3
Null Null interface
Serial Serial
<cr>
Router#clear counters s0
Clear "show interface" counters on this interface
[confirm][Enter]
Router#
00:17:35: %CLEAR-5-COUNTERS: Clear counter on interface
Serial0 by console
Router#
Verifying with the Show IP Interface Command
The show ip interface command will provide you with information
regarding the layer-3 configurations of a router's interfaces.
Copyright ©2002 SYBEX, Inc., Alameda, CA
www.sybex.com