background image
Assessment Test
1.
What protocol does PPP use to identify the Network layer protocol?
A.
NCP
B.
ISDN
C.
HDLC
D.
LCP
2.
You work in a large application-development company providing
MIS services. This company has four 10Mbps shared hubs providing
network services to an NT server. To meet the business requirements,
you must provide many different types of hosts to allow the applica-
tion developers to test the different applications they create. These
hosts must be able to share data between each host and also send data
to and from an enterprise server. The hosts run at 10Mbps and the
server at 100Mbps. Some applications only need 3Mbps of bandwidth
to run at any given time. What network recommendation would you
give this company if money were an issue?
A.
Replace the 10Mbps hubs with 100Mbps hubs.
B.
Install a router and connect all the hubs into separate collision
domains and one large broadcast domain.
C.
Install a layer-2 switch and run a 10Mbps connection to the hosts
and a 100Mbps connection to the server.
D.
Uses bridges to break up the collision domains and create one large
broadcast domain.
3.
How does a host in a Novell network receive a logical address?
A.
DHCP Server.
B.
DNS Server.
C.
It uses the MAC address of the NIC and the network ID assigned
to a router and/or server.
D.
A Novell server dynamically assigns all logical addresses to hosts
for routing purposes.
Copyright ©2002 SYBEX, Inc., Alameda, CA
www.sybex.com