Page 718

694 Chapter 9: Scenarios for Final Preparation

Using Examples 9-19 through 9-22 as references, answer the following questions:

The ping of 170.1.5.2 (R2's E0 interface) from R3 was successful (refer to Example 9-21).
Why was it successful if the access lists in R1 are enabled as shown in its configuration?

Describe the SAP update entering R1 over its S0.2 subinterface. How many services are
described?

What show commands could be executed on R4 to display the IP and IPX addresses
of R1?

R 3 [07/01] via 14.0200.aaaa.aaaa, 34s, Se0.1
R 4 [13/02] via 14.0200.aaaa.aaaa, 34s, Se0.1
R 5 [13/02] via 14.0200.aaaa.aaaa, 34s, Se0.1
R 6 [13/02] via 14.0200.aaaa.aaaa, 34s, Se0.1
R 7 [13/02] via 14.0200.aaaa.aaaa, 34s, Se0.1
R 10 [07/01] via 14.0200.aaaa.aaaa, 34s, Se0.1
R 12 [07/01] via 14.0200.aaaa.aaaa, 34s, Se0.1
R 101 [08/03] via 14.0200.aaaa.aaaa, 34s, Se0.1
R 102 [08/03] via 14.0200.aaaa.aaaa, 34s, Se0.1
R 103 [14/04] via 14.0200.aaaa.aaaa, 34s, Se0.1

R4#show cdp neighbor detail
-------------------------
Device ID: R1
Entry address(es):
IP address: 170.1.14.1
Novell address: 14.0200.aaaa.aaaa
Platform: Cisco 2500, Capabilities: Router
Interface: Serial0.1, Port ID (outgoing port): Serial0.4
Holdtime : 178 sec

Version :
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-AINR-L), Version 11.2(11), RELEASE SOFTWARE (fc1)
Copyright 1986-1997 by Cisco Systems, Inc.
Compiled Mon 29-Dec-97 18:47 by ckralik

R4#show frame-relay pvc

PVC Statistics for interface Serial0 (Frame Relay DTE)

DLCI = 301, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0.1

input pkts 85 output pkts 63 in bytes 14086
out bytes 8464 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 53 out bcast bytes 7614
pvc create time 00:18:40, last time pvc status changed 00:18:40

Example 9-22

Scenario 9-3, Part C--R4 show and debug Output (Continued)

ch09.fm Page 694 Monday, March 20, 2000 5:23 PM