Page 717

Scenario 9-3 693

Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 172 Num Status msgs Rcvd 172
Num Update Status Rcvd 0 Num Status Timeouts 0

R3#show frame-relay map
Serial0.1 (up): point-to-point dlci, dlci 301(0x12D,0x48D0), broadcast
status defined, active

Example 9-22

Scenario 9-3, Part C--R4 show and debug Output

R4#show ip interface brief
Interface IP-Address OK? Method Status Protocol
Serial0 unassigned YES unset up up
Serial0.1 170.1.14.4 YES NVRAM up up
Serial1 unassigned YES unset administratively down down
Ethernet0 170.1.9.4 YES NVRAM up up

R4#show ipx interface brief
Interface IPX Network Encapsulation Status IPX State
Serial0 unassigned not config'd up n/a
Serial0.1 14 FRAME-RELAY up [up]
Serial1 unassigned not config'd administratively down n/a
Ethernet0 8 SAP up [up]
Ethernet0 9 SNAP up [up]

R4#show ipx servers
Codes: S - Static, P - Periodic, E - EIGRP, N - NLSP, H - Holddown, + = detail
2 Total IPX Servers

Table ordering is based on routing and server info

Type Name Net Address Port Route Hops Itf
P 4 Server1 101.0000.0000.0001:0451 8/03 3 Se0.1
P 4 Server2 102.0000.0000.0001:0451 8/03 3 Se0.1

R4#show ipx route
Codes: C - Connected primary network, c - Connected secondary network
S - Static, F - Floating static, L - Local (internal), W - IPXWAN
R - RIP, E - EIGRP, N - NLSP, X - External, A - Aggregate
s - seconds, u - uses

14 Total IPX routes. Up to 1 parallel paths and 16 hops allowed.

No default route known.

C 8 (SAP), E0
c 9 (SNAP), E0
C 14 (FRAME-RELAY), Se0.1
R 2 [07/01] via 14.0200.aaaa.aaaa, 33s, Se0.1

Example 9-21

Scenario 9-3c--R3 show and debug Output (Continued)

continues

ch09.fm Page 693 Monday, March 20, 2000 5:23 PM