Page 714

690 Chapter 9: Scenarios for Final Preparation

R2#show ipx interface brief
Interface IPX Network Encapsulation Status IPX State
Serial0 unassigned not config'd up n/a
Serial0.1 10 FRAME-RELAY up [up]
Serial1 unassigned not config'd administratively down n/a
Ethernet0 4 SAP up [up]
Ethernet0 5 SNAP up [up]
R2#
R2#show ipx route
Codes: C - Connected primary network, c - Connected secondary network
S - Static, F - Floating static, L - Local (internal), W - IPXWAN
R - RIP, E - EIGRP, N - NLSP, X - External, A - Aggregate
s - seconds, u - uses

14 Total IPX routes. Up to 1 parallel paths and 16 hops allowed.

No default route known.

C 4 (SAP), E0
c 5 (SNAP), E0
C 10 (FRAME-RELAY), Se0.1
R 2 [07/01] via 10.0200.aaaa.aaaa, 47s, Se0.1
R 3 [07/01] via 10.0200.aaaa.aaaa, 48s, Se0.1
R 6 [13/02] via 10.0200.aaaa.aaaa, 48s, Se0.1
R 7 [13/02] via 10.0200.aaaa.aaaa, 48s, Se0.1
R 8 [13/02] via 10.0200.aaaa.aaaa, 48s, Se0.1
R 9 [13/02] via 10.0200.aaaa.aaaa, 48s, Se0.1
R 12 [07/01] via 10.0200.aaaa.aaaa, 48s, Se0.1
R 14 [07/01] via 10.0200.aaaa.aaaa, 48s, Se0.1
R 101 [08/03] via 10.0200.aaaa.aaaa, 48s, Se0.1
R 102 [08/03] via 10.0200.aaaa.aaaa, 48s, Se0.1
R 103 [02/02] via 4.0000.0cac.70ef, 42s, E0

R2#ping 14.0200.dddd.dddd
Translating "14.0200.dddd.dddd"

Type escape sequence to abort.
Sending 5, 100-byte IPX Cisco Echoes to 14.0200.dddd.dddd, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 140/144/148 ms

R2#show ipx servers
Codes: S - Static, P - Periodic, E - EIGRP, N - NLSP, H - Holddown, + = detail
3 Total IPX Servers

Table ordering is based on routing and server info

Type Name Net Address Port Route Hops Itf
P 4 Server3 103.0000.0000.0001:0451 2/02 2 E0
P 4 Server1 101.0000.0000.0001:0451 8/03 3 Se0.1
P 4 Server2 102.0000.0000.0001:0451 8/03 3 Se0.1

R2#show frame-relay pvc

Example 9-20

Scenario 9-3, Part C--R2 show and debug Output (Continued)

ch09.fm Page 690 Monday, March 20, 2000 5:23 PM