background image
Answers to Scenario 8-3: Point-to-Point Configuration 629
The LMI type was discovered only by examining the output of the show frame-relay lmi
command. However, this command does not list whether the LMI type was learned via
autosensing or whether it was configured.
The encapsulation type is much more obscure. The show frame-relay map command output
holds the answer. Table 8-55 summarizes those answers (Table 8-49, in the scenario
description).
Answers to Scenario 8-3: Point-to-Point Configuration
Example 8-44, Example 8-45, Example 8-46, and Example 8-47 show the configurations.
Table 8-55
Scenario 8-2 LMI and Encapsulations Used--Completed Table
Router
Port
Subinterface
LMI Type
Encapsulation
Atlanta
s0
--
Cisco
Atlanta
s0
1
cisco
Atlanta
s0
2
cisco
Atlanta
s0
3
ietf
Charlotte
s0
--
Q933A
Charlotte
s0
1
cisco
Nashville
s0
--
Cisco
Nashville s0
1
cisco
Boston
s0
--
Cisco
Boston
s0
1
ietf
Example 8-44
Boston Configuration for Scenario 8-3, Point-to-Point Configuration
hostname Boston
ipx routing 0200.aaaa.aaaa
no ip domain-lookup
username Alaska password Larry
isdn switch-type basic-dms100
!
interface serial0
encapsulation multi-lapb-dce
ip address 200.1.5.5 255.255.255.252
ipx network 202
!
interface serial1
encapsulation hdlc
ip address 200.1.5.9 255.255.255.252
ipx network 203
!
continues
ch08.fm Page 629 Monday, March 20, 2000 5:17 PM