Scenario 8-4: Frame Relay Configuration 621
Figure 8-40
Scenario 8-4 Frame Relay Network
1
Plan the IP and IPX addresses to be used. Use Table 8-51 if helpful. Use IP network
168.15.0.0.
2
Using the DLCIs in Figure 8-40, create configurations for Routers A, B, and E. Use
multipoint subinterfaces for the VCs between A, D, and E.
3
Create alternate configurations for Router A and Router E using point-to-point
subinterfaces instead of multipoint.
4
Describe the contents of the IP and IPX routing tables on Router A, assuming that the
network created from the preceding task is working properly. Only LAN-based IP subnets
and IPX networks need to be listed for this exercise. Use Table 8-51 and Table 8-52 if
useful.
B
S0
C
S0
D
S0
A
S0
E
S0
DLCI 52
DLCI 51
DLCI 53
DLCI 54
DLCI 55
ch08.fm Page 621 Monday, March 20, 2000 5:17 PM