background image
608 Chapter 8: WAN Protocols and Design
Scenarios
Scenario 8-1: Point-to-Point Verification
Use Example 8-33, Example 8-34, and Example 8-35 when completing the exercises and
answering the questions that follow.
Example 8-33
Albuquerque Command Output, Scenario 8-1
Albuquerque#show ip interface brief
Interface IP-Address OK? Method Status Protocol
Serial0 199.1.1.129 YES NVRAM up up
Serial1 199.1.1.193 YES NVRAM up up
Ethernet0 199.1.1.33 YES NVRAM up up
Albuquerque#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default
U - per-user static route, o - ODR
Gateway of last resort is not set
199.1.1.0/24 is variably subnetted, 7 subnets, 2 masks
C 199.1.1.192/27 is directly connected, Serial1
C 199.1.1.130/32 is directly connected, Serial0
C 199.1.1.128/27 is directly connected, Serial0
I 199.1.1.160/27 [100/10476] via 199.1.1.130, 00:00:01, Serial0
[100/10476] via 199.1.1.194, 00:00:54, Serial1
I 199.1.1.64/27 [100/8539] via 199.1.1.130, 00:00:01, Serial0
I 199.1.1.96/27 [100/8539] via 199.1.1.194, 00:00:54, Serial1
C 199.1.1.32/27 is directly connected, Ethernet0
Albuquerque#show ipx route
Codes: C - Connected primary network, c - Connected secondary network
S - Static, F - Floating static, L - Local (internal), W - IPXWAN
R - RIP, E - EIGRP, N - NLSP, X - External, A - Aggregate
s - seconds, u - uses
6 Total IPX routes. Up to 1 parallel paths and 16 hops allowed.
No default route known.
C 1001 (SAP), E0
C 2001 (PPP), Se0
C 2003 (HDLC), Se1
R 1002 [07/01] via 2001.0200.bbbb.bbbb, 50s, Se0
R 1003 [07/01] via 2003.0200.cccc.cccc, 57s, Se1
R 2002 [07/01] via 2001.0200.bbbb.bbbb, 51s, Se0
ch08.fm Page 608 Monday, March 20, 2000 5:17 PM