background image
Scenario 6-4: IPX Examination 439
IPXRIP: src=2012.0200.2222.2222, dst=2012.ffff.ffff.ffff, packet sent
network 1003, hops 2, delay 13
network 2023, hops 1, delay 7
network 1002, hops 1, delay 7
IPXRIP: positing full update to 2023.ffff.ffff.ffff via Serial1 (broadcast)
IPXRIP: src=2023.0200.2222.2222, dst=2023.ffff.ffff.ffff, packet sent
network 1, hops 4, delay 14
network 2, hops 4, delay 14
network 1001, hops 2, delay 13
network 2013, hops 2, delay 13
network 2012, hops 1, delay 7
network 1002, hops 1, delay 7
IPXRIP: update from 2012.0200.1111.1111
1 in 3 hops, delay 8
2 in 3 hops, delay 8
1003 in 2 hops, delay 13
2013 in 1 hops, delay 7
1001 in 1 hops, delay 7
IPXRIP: update from 2023.0200.3333.3333
1 in 4 hops, delay 14
2 in 4 hops, delay 14
1001 in 2 hops, delay 13
IPXRIP: 2012 FFFFFFFF not added, entry in table is static/connected/internal
2012 in 2 hops, delay 13
2013 in 1 hops, delay 7
1003 in 1 hops, delay 7
Example 6-29
Seville Command Output, Scenario 6-4
Seville#show ipx interface
Serial0 is up, line protocol is up
IPX address is 2013.0200.3333.3333 [up]
Delay of this IPX network, in ticks is 6 throughput 0 link delay 0
IPXWAN processing not enabled on this interface.
IPX SAP update interval is 1 minute(s)
IPX type 20 propagation packet forwarding is disabled
Incoming access list is not set
Outgoing access list is not set
IPX helper access list is not set
SAP GNS processing enabled, delay 0 ms, output filter list is not set
SAP Input filter list is not set
SAP Output filter list is not set
SAP Router filter list is not set
Input filter list is not set
Output filter list is not set
Router filter list is not set
Netbios Input host access list is not set
Netbios Input bytes access list is not set
Netbios Output host access list is not set
Example 6-28
Yosemite Command Output, Scenario 6-4 (Continued)
continues
ch06.fm Page 439 Monday, March 20, 2000 5:11 PM