background image
Scenario 6-2: IP Configuration 2 427
Assuming the details established in Figure 6-23 and Table 6-30 for Scenario 6-1, complete or
answer the following:
1
Create the configurations to enable IP as described in Table 6-30. Choose IP addresses as
appropriate.
2
Describe the contents of the routing table on Seville after the routers are installed and all
interfaces are up but no routing protocols or static routes have been configured.
3
Configure static routes for each router so that any host in any subnet could communicate
with other hosts in this network.
4
Configure IGRP to replace the static routes in Task 3.
5
Calculate the subnet broadcast address for each subnet.
Scenario 6-2: IP Configuration 2
Your job is to deploy a new network. The network engineering group has provided a list of
addresses and a network diagram, with Frame Relay global DLCIs, as shown in Figure 6-24
and Table 6-31.
Table 6-30
Scenario 6-1 IP Addresses
Location of Subnet
Geographically
Subnet Mask
Subnet Number
Subnet Broadcast
Ethernet off router in
Albuquerque
255.255.255.0
148.14.1.0
Ethernet off router in Yosemite
255.255.255.0
148.14.2.0
Ethernet off router in Seville
255.255.255.0
148.14.3.0
Serial between Albuquerque
and Yosemite
255.255.255.0
148.14.4.0
Serial between Albuquerque
and Seville
255.255.255.0
148.14.5.0
Serial between Seville and
Yosemite
255.255.255.0
148.14.6.0
ch06.fm Page 427 Monday, March 20, 2000 5:11 PM