424 Chapter 6: Routing
15
If Serial0 has a bandwidth 1544 interface subcommand and Serial1 has a bandwidth 56
interface subcommand, what metric will IPX RIP associate with each interface?
16
True or false: Routers forward SAP packets as they arrive but broadcast SAP packets on
interfaces in which no SAP packets have been received in the last 60 seconds.
17
What show commands list IPX RIP metric values in a Cisco router?
18
Define the term integrated multiprotocol routing in the context of the Cisco IOS and
Novell IPX.
19
If the commands router rip and network 10.0.0.0, with no other network commands,
were configured in a router that has an Ethernet0 interface with IP address 168.10.1.1,
would RIP send updates out Ethernet0?
20
If the commands router igrp 1 and network 10.0.0.0 were configured in a router that has
an Ethernet0 interface with IP address 168.10.1.1, would IGRP advertise about
168.10.0.0?
21
If the commands router igrp 1 and network 10.0.0.0 were configured in a router that has
an Ethernet0 interface with IP address 168.10.1.1, mask 255.255.255.0, would this router
have a route to 168.10.1.0?
22
What routing protocols support integrated multiprotocol routing?
23
Must IGRP metrics for multiple routes to the same subnet be exactly equal for the multiple
routes to be added to the routing table? If not, how close in value do the metrics have to be?
24
When using RIP, what configuration command controls the number of equal-cost routes
that can be added to the routing table at the same time? What is the maximum number of
equal-cost routes to the same destination that can be included in the IP routing table at
once?
25
When using IGRP, what configuration command controls the number of equal-cost routes
that can be added to the routing table at the same time? What is the maximum number of
equal-cost routes to the same destination that can be included in the IP routing table at
once?
26
What feature supported by RIP-2 allows it to support variable-length subnet masks
(VLSM)?
27
Name three features of RIP-2 that are not features of RIP-1.
28
What configuration commands are different between a router configured for RIP-1 and a
router configured for only support of RIP-2?
29
Identify two reasons for using tunneling.
30
What tunneling transport protocol is used by the IOS?
ch06.fm Page 424 Monday, March 20, 2000 5:11 PM