Page 336

312 Chapter 5: Network Protocols

Figure 5-39

Sample Network Used for IPX debug Commands

Example 5-27

IPX debug Commands

Seville#show ipx route
Codes: C - Connected primary network, c - Connected secondary network
S - Static, F - Floating static, L - Local (internal), W - IPXWAN
R - RIP, E - EIGRP, N - NLSP, X - External, A - Aggregate
s - seconds, u - uses, U - Per-user static

9 Total IPX routes. Up to 1 parallel paths and 16 hops allowed.

No default route known.

C 3 (NOVELL-ETHER), Et0
C 5 (FRAME-RELAY), Se0.2
C 6 (FRAME-RELAY), Se0.1
R 1 [07/01] via 6.0200.aaaa.aaaa, 51s, Se0.1
R 2 [07/01] via 5.0200.bbbb.bbbb, 40s, Se0.2
R 4 [07/01] via 5.0200.bbbb.bbbb, 40s, Se0.2
R 11 [08/03] via 6.0200.aaaa.aaaa, 51s, Se0.1
R 22 [08/03] via 6.0200.aaaa.aaaa, 51s, Se0.1
R 200 [08/02] via 6.0200.aaaa.aaaa, 51s, Se0.1
Seville#
Seville#debug ipx routing events
IPX routing events debugging is on

01:04:03: IPXRIP: 5 FFFFFFFF not added, entry in table is static/connected/internal
01:04:12: IPXRIP: positing full update to 6.ffff.ffff.ffff via Serial0.1
(broadcast)

Albuquerque

Net1

SVR2

SVR1

Seville

Yosemite

Net2

Net5

Net4

Net6

Net3

ch05.fm Page 312 Monday, March 20, 2000 5:06 PM