208 Chapter 4: Bridges/Switches and LAN Design
32
What command on a 1900 series switch would cause the switch to block frames destined
to 0200.7777.7777, entering interface 0/5, from going out port 0/6?
33
What Catalyst 1900 switch command displays the version of IOS running in the switch?
34
What does the Catalyst 1900 switch command address violation disable do?
35
What command erases the startup config in a Catalyst 1900 switch?
36
Configuration is added to the running configuration in RAM when commands are typed
in Catalyst 1900 configuration mode. What causes these commands to be saved into
NVRAM?
37
How do EXEC and configuration commands refer to the two Fast Ethernet ports on a
Catalyst 1912 switch?
38
What Catalyst 1900 switch command displays the switching table?
39
What does VTP do, and what does the abbreviation stand for?
40
Name the three VTP modes. Which of these does not allow VLANs to be added or
modified?
41
What Catalyst 1900 switch command assigns a port to a particular VLAN?
42
What Catalyst 1900 switch command creates VLAN 10 and assigns it a name of
bigbadvlan?
43
What Catalyst 1900 switch command lists the details about VLAN number 10?
44
What Catalyst 1900 switch command configures ISL trunking on fastethernet port 26 so
that as long as the switch port on the other end of the trunk is not disabled (off) or
configured to not negotiate to become a trunk, the trunk will definitely be placed in
trunking mode?
45
What type of VTP mode allows a switch to create VTP advertisements?
ch04.fm Page 208 Monday, March 20, 2000 5:02 PM