![[APACHE DOCUMENTATION]](../images/sub.gif)
A few notes on general pedagogical style here. In the interest of conciseness, all structure declarations here are incomplete --- the real ones have more slots that I'm not telling you about. For the most part, these are reserved to one component of the server core or another, and should be altered by modules with caution. However, in some cases, they really are things I just haven't gotten around to yet. Welcome to the bleeding edge.
Finally, here's an outline, to give you some bare idea of what's coming up, and in what order:
SetEnv, which don't really fit well elsewhere.
OK.
DECLINED. In this case, the
server behaves in all respects as if the handler simply hadn't
been there.
*/* (i.e., a
wildcard MIME type specification). However, wildcard handlers are
only invoked if the server has already tried and failed to find a more
specific response handler for the MIME type of the requested object
(either none existed, or they all declined).
The handlers themselves are functions of one argument (a
request_rec structure. vide infra), which returns an
integer, as above.
ScriptAlias config file
command. It's actually a great deal more complicated than most
modules, but if we're going to have only one example, it might as well
be the one with its fingers in every place.
Let's begin with handlers. In order to handle the CGI scripts, the
module declares a response handler for them. Because of
ScriptAlias, it also has handlers for the name
translation phase (to recognize ScriptAliased URIs), the
type-checking phase (any ScriptAliased request is typed
as a CGI script).
The module needs to maintain some per (virtual)
server information, namely, the ScriptAliases in effect;
the module structure therefore contains pointers to a functions which
builds these structures, and to another which combines two of them (in
case the main server and a virtual server both have
ScriptAliases declared).
Finally, this module contains code to handle the
ScriptAlias command itself. This particular module only
declares one command, but there could be more, so modules have
command tables which declare their commands, and describe
where they are permitted, and how they are to be invoked.
A final note on the declared types of the arguments of some of these
commands: a pool is a pointer to a resource pool
structure; these are used by the server to keep track of the memory
which has been allocated, files opened, etc., either to service a
particular request, or to handle the process of configuring itself.
That way, when the request is over (or, for the configuration pool,
when the server is restarting), the memory can be freed, and the files
closed, en masse, without anyone having to write explicit code to
track them all down and dispose of them. Also, a
cmd_parms structure contains various information about
the config file being read, and other status information, which is
sometimes of use to the function which processes a config-file command
(such as ScriptAlias).
With no further ado, the module itself:
/* Declarations of handlers. */
int translate_scriptalias (request_rec *);
int type_scriptalias (request_rec *);
int cgi_handler (request_rec *);
/* Subsidiary dispatch table for response-phase handlers, by MIME type */
handler_rec cgi_handlers[] = {
{ "application/x-httpd-cgi", cgi_handler },
{ NULL }
};
/* Declarations of routines to manipulate the module's configuration
* info. Note that these are returned, and passed in, as void *'s;
* the server core keeps track of them, but it doesn't, and can't,
* know their internal structure.
*/
void *make_cgi_server_config (pool *);
void *merge_cgi_server_config (pool *, void *, void *);
/* Declarations of routines to handle config-file commands */
extern char *script_alias(cmd_parms *, void *per_dir_config, char *fake,
char *real);
command_rec cgi_cmds[] = {
{ "ScriptAlias", script_alias, NULL, RSRC_CONF, TAKE2,
"a fakename and a realname"},
{ NULL }
};
module cgi_module = {
STANDARD_MODULE_STUFF,
NULL, /* initializer */
NULL, /* dir config creator */
NULL, /* dir merger --- default is to override */
make_cgi_server_config, /* server config */
merge_cgi_server_config, /* merge server config */
cgi_cmds, /* command table */
cgi_handlers, /* handlers */
translate_scriptalias, /* filename translation */
NULL, /* check_user_id */
NULL, /* check auth */
NULL, /* check access */
type_scriptalias, /* type_checker */
NULL, /* fixups */
NULL, /* logger */
NULL /* header parser */
};
request_rec structure.
This structure describes a particular request which has been made to
the server, on behalf of a client. In most cases, each connection to
the client generates only one request_rec structure.
request_recrequest_rec contains pointers to a resource pool
which will be cleared when the server is finished handling the
request; to structures containing per-server and per-connection
information, and most importantly, information on the request itself.The most important such information is a small set of character strings describing attributes of the object being requested, including its URI, filename, content-type and content-encoding (these being filled in by the translation and type-check handlers which handle the request, respectively).
Other commonly used data items are tables giving the MIME headers on
the client's original request, MIME headers to be sent back with the
response (which modules can add to at will), and environment variables
for any subprocesses which are spawned off in the course of servicing
the request. These tables are manipulated using the
table_get and table_set routines.
Note that the Content-type header value cannot be
set by module content-handlers using the table_*()
routines. Rather, it is set by pointing the content_type
field in the request_rec structure to an appropriate
string. E.g.,
r->content_type = "text/html";
Finally, there are pointers to two data structures which, in turn,
point to per-module configuration structures. Specifically, these
hold pointers to the data structures which the module has built to
describe the way it has been configured to operate in a given
directory (via .htaccess files or
<Directory> sections), for private data it has
built in the course of servicing the request (so modules' handlers for
one phase can pass `notes' to their handlers for other phases). There
is another such configuration vector in the server_rec
data structure pointed to by the request_rec, which
contains per (virtual) server configuration data.Here is an abridged declaration, giving the fields most commonly used:
struct request_rec {
pool *pool;
conn_rec *connection;
server_rec *server;
/* What object is being requested */
char *uri;
char *filename;
char *path_info;
char *args; /* QUERY_ARGS, if any */
struct stat finfo; /* Set by server core;
* st_mode set to zero if no such file */
char *content_type;
char *content_encoding;
/* MIME header environments, in and out. Also, an array containing
* environment variables to be passed to subprocesses, so people can
* write modules to add to that environment.
*
* The difference between headers_out and err_headers_out is that
* the latter are printed even on error, and persist across internal
* redirects (so the headers printed for ErrorDocument handlers will
* have them).
*/
table *headers_in;
table *headers_out;
table *err_headers_out;
table *subprocess_env;
/* Info about the request itself... */
int header_only; /* HEAD request, as opposed to GET */
char *protocol; /* Protocol, as given to us, or HTTP/0.9 */
char *method; /* GET, HEAD, POST, etc. */
int method_number; /* M_GET, M_POST, etc. */
/* Info for logging */
char *the_request;
int bytes_sent;
/* A flag which modules can set, to indicate that the data being
* returned is volatile, and clients should be told not to cache it.
*/
int no_cache;
/* Various other config info which may change with .htaccess files
* These are config vectors, with one void* pointer for each module
* (the thing pointed to being the module's business).
*/
void *per_dir_config; /* Options set in config files, etc. */
void *request_config; /* Notes on *this* request */
};
request_rec structures are built by reading an HTTP
request from a client, and filling in the fields. However, there are
a few exceptions:
*.var file), or a CGI script which returned a
local `Location:', then the resource which the user requested
is going to be ultimately located by some URI other than what
the client originally supplied. In this case, the server does
an internal redirect, constructing a new
request_rec for the new URI, and processing it
almost exactly as if the client had requested the new URI
directly.
ErrorDocument is in scope, the same internal
redirect machinery comes into play.
Such handlers can construct a sub-request, using the
functions sub_req_lookup_file and
sub_req_lookup_uri; this constructs a new
request_rec structure and processes it as you
would expect, up to but not including the point of actually
sending a response. (These functions skip over the access
checks if the sub-request is for a file in the same directory
as the original request).
(Server-side includes work by building sub-requests and then
actually invoking the response handler for them, via the
function run_sub_request).
request_rec, has to return an int to
indicate what happened. That can either be
REDIRECT, then
the module should put a Location in the request's
headers_out, to indicate where the client should be
redirected to.
request_rec structure (or, in the case of access
checkers, simply by returning the correct error code). However,
response handlers have to actually send a request back to the client.
They should begin by sending an HTTP response header, using the
function send_http_header. (You don't have to do
anything special to skip sending the header for HTTP/0.9 requests; the
function figures out on its own that it shouldn't do anything). If
the request is marked header_only, that's all they should
do; they should return after that, without attempting any further
output.
Otherwise, they should produce a request body which responds to the
client as appropriate. The primitives for this are rputc
and rprintf, for internally generated output, and
send_fd, to copy the contents of some FILE *
straight to the client.
At this point, you should more or less understand the following piece
of code, which is the handler which handles GET requests
which have no more specific handler; it also shows how conditional
GETs can be handled, if it's desirable to do so in a
particular response handler --- set_last_modified checks
against the If-modified-since value supplied by the
client, if any, and returns an appropriate code (which will, if
nonzero, be USE_LOCAL_COPY). No similar considerations apply for
set_content_length, but it returns an error code for
symmetry.
int default_handler (request_rec *r)
{
int errstatus;
FILE *f;
if (r->method_number != M_GET) return DECLINED;
if (r->finfo.st_mode == 0) return NOT_FOUND;
if ((errstatus = set_content_length (r, r->finfo.st_size))
|| (errstatus = set_last_modified (r, r->finfo.st_mtime)))
return errstatus;
f = fopen (r->filename, "r");
if (f == NULL) {
log_reason("file permissions deny server access",
r->filename, r);
return FORBIDDEN;
}
register_timeout ("send", r);
send_http_header (r);
if (!r->header_only) send_fd (f, r);
pfclose (r->pool, f);
return OK;
}
Finally, if all of this is too much of a challenge, there are a few
ways out of it. First off, as shown above, a response handler which
has not yet produced any output can simply return an error code, in
which case the server will automatically produce an error response.
Secondly, it can punt to some other handler by invoking
internal_redirect, which is how the internal redirection
machinery discussed above is invoked. A response handler which has
internally redirected should always return OK.
(Invoking internal_redirect from handlers which are
not response handlers will lead to serious confusion).
auth_type,
auth_name, and requires.
get_basic_auth_pw,
which sets the connection->user structure field
automatically, and note_basic_auth_failure, which
arranges for the proper WWW-Authenticate: header
to be sent back).
request_rec structures which are
threaded through the r->prev and r->next
pointers. The request_rec which is passed to the logging
handlers in such cases is the one which was originally built for the
initial request from the client; note that the bytes_sent field will
only be correct in the last request in the chain (the one for which a
response was actually sent).
The way this works is as follows: the memory which is allocated, file opened, etc., to deal with a particular request are tied to a resource pool which is allocated for the request. The pool is a data structure which itself tracks the resources in question.
When the request has been processed, the pool is cleared. At that point, all the memory associated with it is released for reuse, all files associated with it are closed, and any other clean-up functions which are associated with the pool are run. When this is over, we can be confident that all the resource tied to the pool have been released, and that none of them have leaked.
Server restarts, and allocation of memory and resources for per-server configuration, are handled in a similar way. There is a configuration pool, which keeps track of resources which were allocated while reading the server configuration files, and handling the commands therein (for instance, the memory that was allocated for per-server module configuration, log files and other files that were opened, and so forth). When the server restarts, and has to reread the configuration files, the configuration pool is cleared, and so the memory and file descriptors which were taken up by reading them the last time are made available for reuse.
It should be noted that use of the pool machinery isn't generally
obligatory, except for situations like logging handlers, where you
really need to register cleanups to make sure that the log file gets
closed when the server restarts (this is most easily done by using the
function pfopen, which also
arranges for the underlying file descriptor to be closed before any
child processes, such as for CGI scripts, are execed), or
in case you are using the timeout machinery (which isn't yet even
documented here). However, there are two benefits to using it:
resources allocated to a pool never leak (even if you allocate a
scratch string, and just forget about it); also, for memory
allocation, palloc is generally faster than
malloc.
We begin here by describing how memory is allocated to pools, and then discuss how other resources are tracked by the resource pool machinery.
palloc, which takes two arguments, one being a pointer to
a resource pool structure, and the other being the amount of memory to
allocate (in chars). Within handlers for handling
requests, the most common way of getting a resource pool structure is
by looking at the pool slot of the relevant
request_rec; hence the repeated appearance of the
following idiom in module code:
int my_handler(request_rec *r)
{
struct my_structure *foo;
...
foo = (foo *)palloc (r->pool, sizeof(my_structure));
}
Note that there is no pfree ---
palloced memory is freed only when the associated
resource pool is cleared. This means that palloc does not
have to do as much accounting as malloc(); all it does in
the typical case is to round up the size, bump a pointer, and do a
range check.
(It also raises the possibility that heavy use of palloc
could cause a server process to grow excessively large. There are
two ways to deal with this, which are dealt with below; briefly, you
can use malloc, and try to be sure that all of the memory
gets explicitly freed, or you can allocate a sub-pool of
the main pool, allocate your memory in the sub-pool, and clear it out
periodically. The latter technique is discussed in the section on
sub-pools below, and is used in the directory-indexing code, in order
to avoid excessive storage allocation when listing directories with
thousands of files).
pcalloc has the same
interface as palloc, but clears out the memory it
allocates before it returns it. The function pstrdup
takes a resource pool and a char * as arguments, and
allocates memory for a copy of the string the pointer points to,
returning a pointer to the copy. Finally pstrcat is a
varargs-style function, which takes a pointer to a resource pool, and
at least two char * arguments, the last of which must be
NULL. It allocates enough memory to fit copies of each
of the strings, as a unit; for instance:
pstrcat (r->pool, "foo", "/", "bar", NULL);
returns a pointer to 8 bytes worth of memory, initialized to
"foo/bar".
pfopen, which
takes a resource pool and two strings as arguments; the strings are
the same as the typical arguments to fopen, e.g.,
...
FILE *f = pfopen (r->pool, r->filename, "r");
if (f == NULL) { ... } else { ... }
There is also a popenf routine, which parallels the
lower-level open system call. Both of these routines
arrange for the file to be closed when the resource pool in question
is cleared.
Unlike the case for memory, there are functions to close
files allocated with pfopen, and popenf,
namely pfclose and pclosef. (This is
because, on many systems, the number of files which a single process
can have open is quite limited). It is important to use these
functions to close files allocated with pfopen and
popenf, since to do otherwise could cause fatal errors on
systems such as Linux, which react badly if the same
FILE* is closed more than once.
(Using the close functions is not mandatory, since the
file will eventually be closed regardless, but you should consider it
in cases where your module is opening, or could open, a lot of files).
spawn_process.
palloc() and the
associated primitives may result in undesirably profligate resource
allocation. You can deal with such a case by creating a
sub-pool, allocating within the sub-pool rather than the main
pool, and clearing or destroying the sub-pool, which releases the
resources which were associated with it. (This really is a
rare situation; the only case in which it comes up in the standard
module set is in case of listing directories, and then only with
very large directories. Unnecessary use of the primitives
discussed here can hair up your code quite a bit, with very little
gain).
The primitive for creating a sub-pool is make_sub_pool,
which takes another pool (the parent pool) as an argument. When the
main pool is cleared, the sub-pool will be destroyed. The sub-pool
may also be cleared or destroyed at any time, by calling the functions
clear_pool and destroy_pool, respectively.
(The difference is that clear_pool frees resources
associated with the pool, while destroy_pool also
deallocates the pool itself. In the former case, you can allocate new
resources within the pool, and clear it again, and so forth; in the
latter case, it is simply gone).
One final note --- sub-requests have their own resource pools, which
are sub-pools of the resource pool for the main request. The polite
way to reclaim the resources associated with a sub request which you
have allocated (using the sub_req_lookup_... functions)
is destroy_sub_request, which frees the resource pool.
Before calling this function, be sure to copy anything that you care
about which might be allocated in the sub-request's resource pool into
someplace a little less volatile (for instance, the filename in its
request_rec structure).
(Again, under most circumstances, you shouldn't feel obliged to call
this function; only 2K of memory or so are allocated for a typical sub
request, and it will be freed anyway when the main request pool is
cleared. It is only when you are allocating many, many sub-requests
for a single main request that you should seriously consider the
destroy... functions).
However, just giving the modules command tables is not enough to
divorce them completely from the server core. The server has to
remember the commands in order to act on them later. That involves
maintaining data which is private to the modules, and which can be
either per-server, or per-directory. Most things are per-directory,
including in particular access control and authorization information,
but also information on how to determine file types from suffixes,
which can be modified by AddType and
DefaultType directives, and so forth. In general, the
governing philosophy is that anything which can be made
configurable by directory should be; per-server information is
generally used in the standard set of modules for information like
Aliases and Redirects which come into play
before the request is tied to a particular place in the underlying
file system.
Another requirement for emulating the NCSA server is being able to
handle the per-directory configuration files, generally called
.htaccess files, though even in the NCSA server they can
contain directives which have nothing at all to do with access
control. Accordingly, after URI -> filename translation, but before
performing any other phase, the server walks down the directory
hierarchy of the underlying filesystem, following the translated
pathname, to read any .htaccess files which might be
present. The information which is read in then has to be
merged with the applicable information from the server's own
config files (either from the <Directory> sections
in access.conf, or from defaults in
srm.conf, which actually behaves for most purposes almost
exactly like <Directory />).
Finally, after having served a request which involved reading
.htaccess files, we need to discard the storage allocated
for handling them. That is solved the same way it is solved wherever
else similar problems come up, by tying those structures to the
per-transaction resource pool.
mod_mime.c,
which defines the file typing handler which emulates the NCSA server's
behavior of determining file types from suffixes. What we'll be
looking at, here, is the code which implements the
AddType and AddEncoding commands. These
commands can appear in .htaccess files, so they must be
handled in the module's private per-directory data, which in fact,
consists of two separate tables for MIME types and
encoding information, and is declared as follows:
typedef struct {
table *forced_types; /* Additional AddTyped stuff */
table *encoding_types; /* Added with AddEncoding... */
} mime_dir_config;
When the server is reading a configuration file, or
<Directory> section, which includes one of the MIME
module's commands, it needs to create a mime_dir_config
structure, so those commands have something to act on. It does this
by invoking the function it finds in the module's `create per-dir
config slot', with two arguments: the name of the directory to which
this configuration information applies (or NULL for
srm.conf), and a pointer to a resource pool in which the
allocation should happen.
(If we are reading a .htaccess file, that resource pool
is the per-request resource pool for the request; otherwise it is a
resource pool which is used for configuration data, and cleared on
restarts. Either way, it is important for the structure being created
to vanish when the pool is cleared, by registering a cleanup on the
pool if necessary).
For the MIME module, the per-dir config creation function just
pallocs the structure above, and a creates a couple of
tables to fill it. That looks like this:
void *create_mime_dir_config (pool *p, char *dummy)
{
mime_dir_config *new =
(mime_dir_config *) palloc (p, sizeof(mime_dir_config));
new->forced_types = make_table (p, 4);
new->encoding_types = make_table (p, 4);
return new;
}
Now, suppose we've just read in a .htaccess file. We
already have the per-directory configuration structure for the next
directory up in the hierarchy. If the .htaccess file we
just read in didn't have any AddType or
AddEncoding commands, its per-directory config structure
for the MIME module is still valid, and we can just use it.
Otherwise, we need to merge the two structures somehow.
To do that, the server invokes the module's per-directory config merge
function, if one is present. That function takes three arguments:
the two structures being merged, and a resource pool in which to
allocate the result. For the MIME module, all that needs to be done
is overlay the tables from the new per-directory config structure with
those from the parent:
void *merge_mime_dir_configs (pool *p, void *parent_dirv, void *subdirv)
{
mime_dir_config *parent_dir = (mime_dir_config *)parent_dirv;
mime_dir_config *subdir = (mime_dir_config *)subdirv;
mime_dir_config *new =
(mime_dir_config *)palloc (p, sizeof(mime_dir_config));
new->forced_types = overlay_tables (p, subdir->forced_types,
parent_dir->forced_types);
new->encoding_types = overlay_tables (p, subdir->encoding_types,
parent_dir->encoding_types);
return new;
}
As a note --- if there is no per-directory merge function present, the
server will just use the subdirectory's configuration info, and ignore
the parent's. For some modules, that works just fine (e.g., for the
includes module, whose per-directory configuration information
consists solely of the state of the XBITHACK), and for
those modules, you can just not declare one, and leave the
corresponding structure slot in the module itself NULL.
AddType and AddEncoding commands. To find
commands, the server looks in the module's command table.
That table contains information on how many arguments the commands
take, and in what formats, where it is permitted, and so forth. That
information is sufficient to allow the server to invoke most
command-handling functions with pre-parsed arguments. Without further
ado, let's look at the AddType command handler, which
looks like this (the AddEncoding command looks basically
the same, and won't be shown here):
char *add_type(cmd_parms *cmd, mime_dir_config *m, char *ct, char *ext)
{
if (*ext == '.') ++ext;
table_set (m->forced_types, ext, ct);
return NULL;
}
This command handler is unusually simple. As you can see, it takes
four arguments, two of which are pre-parsed arguments, the third being
the per-directory configuration structure for the module in question,
and the fourth being a pointer to a cmd_parms structure.
That structure contains a bunch of arguments which are frequently of
use to some, but not all, commands, including a resource pool (from
which memory can be allocated, and to which cleanups should be tied),
and the (virtual) server being configured, from which the module's
per-server configuration data can be obtained if required.
Another way in which this particular command handler is unusually
simple is that there are no error conditions which it can encounter.
If there were, it could return an error message instead of
NULL; this causes an error to be printed out on the
server's stderr, followed by a quick exit, if it is in
the main config files; for a .htaccess file, the syntax
error is logged in the server error log (along with an indication of
where it came from), and the request is bounced with a server error
response (HTTP error status, code 500).
The MIME module's command table has entries for these commands, which
look like this:
command_rec mime_cmds[] = {
{ "AddType", add_type, NULL, OR_FILEINFO, TAKE2,
"a mime type followed by a file extension" },
{ "AddEncoding", add_encoding, NULL, OR_FILEINFO, TAKE2,
"an encoding (e.g., gzip), followed by a file extension" },
{ NULL }
};
The entries in these tables are:
(void *) pointer, which is passed in the
cmd_parms structure to the command handler ---
this is useful in case many similar commands are handled by the
same function.
AllowOverride
option, and an additional mask bit, RSRC_CONF,
indicating that the command may appear in the server's own
config files, but not in any .htaccess
file.
TAKE2 indicates two pre-parsed arguments. Other
options are TAKE1, which indicates one pre-parsed
argument, FLAG, which indicates that the argument
should be On or Off, and is passed in
as a boolean flag, RAW_ARGS, which causes the
server to give the command the raw, unparsed arguments
(everything but the command name itself). There is also
ITERATE, which means that the handler looks the
same as TAKE1, but that if multiple arguments are
present, it should be called multiple times, and finally
ITERATE2, which indicates that the command handler
looks like a TAKE2, but if more arguments are
present, then it should be called multiple times, holding the
first argument constant.
NULL).
request_rec's per-directory configuration vector by using
the get_module_config function.
int find_ct(request_rec *r)
{
int i;
char *fn = pstrdup (r->pool, r->filename);
mime_dir_config *conf = (mime_dir_config *)
get_module_config(r->per_dir_config, &mime_module);
char *type;
if (S_ISDIR(r->finfo.st_mode)) {
r->content_type = DIR_MAGIC_TYPE;
return OK;
}
if((i=rind(fn,'.')) < 0) return DECLINED;
++i;
if ((type = table_get (conf->encoding_types, &fn[i])))
{
r->content_encoding = type;
/* go back to previous extension to try to use it as a type */
fn[i-1] = '\0';
if((i=rind(fn,'.')) < 0) return OK;
++i;
}
if ((type = table_get (conf->forced_types, &fn[i])))
{
r->content_type = type;
}
return OK;
}
The only substantial difference is that when a command needs to
configure the per-server private module data, it needs to go to the
cmd_parms data to get at it. Here's an example, from the
alias module, which also indicates how a syntax error can be returned
(note that the per-directory configuration argument to the command
handler is declared as a dummy, since the module doesn't actually have
per-directory config data):
char *add_redirect(cmd_parms *cmd, void *dummy, char *f, char *url)
{
server_rec *s = cmd->server;
alias_server_conf *conf = (alias_server_conf *)
get_module_config(s->module_config,&alias_module);
alias_entry *new = push_array (conf->redirects);
if (!is_url (url)) return "Redirect to non-URL";
new->fake = f; new->real = url;
return NULL;
}
