580
Chapter 11
Troubleshooting Switched Ethernet
MII Status:
Ports 1 2
-----------
N N
SAINT/SAGE Status :
Ports 1 2 3
--------------
. . .
Packet Buffer Status :
Ports 1 2 3
--------------
. . .
Loopback Status [Reported by Module 1] :
Ports 1 2 3
--------------
. . .
Channel Status :
Ports 1 2
-----------
. .
The following output provides the test results from module three of a
Catalyst 5505. The module has 48 ports providing 10Mbit Ethernet. By
using the show test 3 command, the switch reports the test results of the
entire card, including the SAINT and EARL ASICs. These ASICs (Appli-
cation Specific Integrated Circuits) will be reviewed later in this chapter.
Switch_A> (enable) show test 3
Module 3 : 48-port 10BaseT Ethernet
LCP Diag Status for Module 3 (. = Pass, F = Fail, N = N/A)
CPU : . Sprom : . Bootcsum : . Archsum : .
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com