Debugging Scalable NetWare Protocols
507
3 Total IPX Servers
Table ordering is based on routing and server info
Type Name Net Address Port Route Hops Itf
N 4 server1 10.0000.0000.0001:0000 12/02 3 Se0
N 4 server2 10.0000.0000.0002:0000 12/02 3 Se0
N 4 server3 10.0000.0000.0003:0000 12/02 3 Se0
show ipx nlsp neighbors
The show ipx nlsp neighbors command displays all NLSP neighbors. A
neighbor is defined as an NLSP resource that is directly connected--NLSP
packets traverse only the local segment because they are not forwarded by
the router.
Router_A#show ipx nlsp neighbors
NLSP Level-1 Neighbors: Tag Identifier = notag
System Id Interface State Holdtime Priority Circuit Id
Router_B Se0 Up 55 0 04
Router_A has one NLSP neighbor, Router_B. By adding the detail com-
mand, the output includes the IPX internal network number and the uptime.
Router_A#show ipx nlsp neighbors detail
NLSP Level-1 Neighbors: Tag Identifier = notag
System Id Interface State Holdtime Priority Circuit Id
Router_B Se0 Up 43 0 04
IPX Address: B.0000.0000.0001
IPX Areas: 00000000/00000000
Uptime: 01:13:09
show ipx nlsp database
This command provides data regarding the local NLSP process. The LSPID
(link state protocol identifier) comprises the system identifier, the pseudon-
ode circuit identifier, and the fragment number. LSP (link state protocol) is
the foundation of NLSP, and the show ipx nlsp database command
reports significant information, including the last sequence number, the
checksum, and the LSP holdtime. The hold timer reflects the times in seconds
before the information expires, assuming that Hello packets are received.
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com