New Features in Release 12.2(28)SB

• AAA Authorization and Authentication Cache

• AAA Double Authentication Secured by Absolute Timeout

• ACL Default Direction

• Any Transport over MPLS

• Any Transport over MPLS (AToM) Sequencing Support

• ATM Conditional Debug Support

• ATM Multilink PPP Support on Multiple VCs

• ATM OAM Ping

• ATM OAM Support for F5 Continuity Check

• ATM OAM Traffic Reduction

• ATM PVC Range and Routed Bridge Encapsulation Subinterface Grouping

• Attribute Screening for Access Requests

• Autosense of MUX/SNAP Encapsulation and PPPoA/PPPoE on ATM PVCs

• BECN and FECN Marking for Frame Relay over MPLS

• BGP Increased Support of Numbered AS-path Access Lists to 500

• BGP Received Routes MIB

• BGP Support for Nonstop Routing (NSR) with Stateful Switchover (SSO)

• Bit Error Rate Testing

• Bridged 1483 Encapsulated Traffic over ATM SVCs

• Byte-Based Weighted Random Early Detection

• Cisco Express Forwarding: Command Changes

• Cisco IOS In Service Software Upgrade and Enhanced Fast Software Upgrade Process

• Cisco IOS IPv6 Configuration Library

• Cisco Nonstop Forwarding

• Clear IPC Statistics

• Configurable MAC Address for PPPoE

• Configuration Enhancements for Broadband Scalability

• Define Interface Policy-Map AV Pairs AAA

• DHCP Features in Cisco IOS Release 12.2(28)SB

• DHCP Option 82 Support for Routed Bridge Encapsulation

• Dialer CEF

• Distributed Management Event and Expression MIB Persistence

• Distributed Time-Based Access Lists

• DNS Spoofing

• Dynamic DNS Support for Cisco IOS Software

• Dynamic Subscriber Bandwidth Selection

• EIGRP MPLS VPN PE-CE Site of Origin (SoO)

• Embedded Event Manager 2.1

• Enable Multilink PPP via RADIUS for Preauthentication User

• Area Command in Interface Mode for OSPFv2

• Encrypted Vendor Specific Attributes

• Enhanced Object Tracking

• Enhanced Test Command

• Extended NAS-Port-Type and NAS-Port Support

• Framed-Route in RADIUS Accounting

• Frame Relay Fast Restart
  12.0(19)ST1

• Frame Relay MIB Enhancements

• Frame Relay PVC Bundles with IP and MPLS QoS Support

• Generic Routing Encapsulation (GRE) Tunnel Keepalive

• Individual SNMP Trap Support

• Intelligent Service Gateway (ISG) Configuration Library

• Inter-Autonomous Systems for MPLS VPNs

• Interface Index Display and Interface Alias Long Name Support for SNMP

• ISSU MPLS Clients

• L2TP Congestion Avoidance

• L2TP Dial-Out Load Balancing and Redundancy

• L2TP Disconnect Cause Information

• L2TP Extended Failover

• L2TP Redirect

• L2TP Security

• L2TP Tunnel Connection Speed Labeling

• L2VPN Pseudowire Switching

• L2VPN Pseudowire Redundancy

• Layer 2 Tunnel Protocol Version 3

• Layer 2 Local Switching

• Link Fragmentation and Interleaving for Frame Relay and ATM Virtual Circuits

• Local AAA Server

• Local Template-Based ATM PVC Provisioning

• Logging to Local Nonvolatile Storage (ATA Disk)
  This feature was formerly named as SYSLOG Writing to Flash.

• Low Latency Queueing with Priority Percentage Support

• MPLS-Aware NetFlow

• MPLS DiffServ Tunneling Modes

• MPLS Egress NetFlow Accounting

• MPLS High Availability: Command Changes

• MPLS High Availability: Overview

• MPLS Label Distribution Protocol MIB

• MPLS LDP Autoconfiguration

• MPLS—LDP MD5 Global Configuration

• NSF/SSO - MPLS LDP and LDP Graceful Restart

• MPLS LDP Session Protection

• MPLS MTU Command Changes

• MPLS—Multilink PPP Support

• MPLS Traffic Engineering and Enhancements

• MPLS Traffic Engineering -- DiffServ Aware (DS-TE)

• MPLS Traffic Engineering Forwarding Adjacency

• MPLS Traffic Engineering -- Overload Avoidance Support for IS-IS

• MPLS Traffic Engineering (TE)--Automatic Bandwidth Adjustment for TE Tunnels

• MPLS Traffic Engineering (TE)--Configurable Path Calculation Metric for Tunnels

• MPLS Traffic Engineering: Interarea Tunnels

• MPLS Traffic Engineering (TE)--IP Explicit Address Exclusion

• MPLS Traffic Engineering (TE) MIB

• MPLS Traffic Engineering (TE)—Scalability Enhancements

• MPLS VPN--Carrier Supporting Carrier

• MPLS VPN--Carrier Supporting Carrier--IPv4 BGP Label Distribution

• MPLS VPN: eBGP Multipath Support for CSC and InterAS

• MPLS VPN—Explicit Null Label Support with BGP IPv4 Label Session

• MPLS VPN Half-Duplex VRF

• MPLS VPN--Inter-AS--IPv4 BGP Label Distribution

• MPLS VPN: MIB Support

• MPLS VPN—Show Running VRF

• MQC Policy Map Support on Configured VC Range

• MS CHAP V2

• Multicast VPN--IP Multicast Support for MPLS VPNs

• Multilink Frame Relay (FRF.16.1)

• Multilink PPP Minimum Links Mandatory

• NetFlow MPLS Label Export

• NetFlow PXF Timers

• NSF/SSO: Any Transport over MPLS and Graceful Restart

• NSF/SSO: L2VPN Pseudowire Redundancy

• NSF/SSO—MPLS VPN

• Offload Server Accounting Enhancement

• OSPF ABR Type 3 LSA Filtering

• Packet Classification Using the Frame Relay DLCI Number

• Packet Classification Using the Frame Relay DLCI Number

• Peer Pool Backup

• Per Packet Load Balancing

• Per-Session QoS

• Per-User QoS via AAA Policy Name

• Per VRF AAA

• Policer Enhancement: Multiple Actions

• Post-Switchover Core Dump

• PPP/MLP MRRU Negotiation Configuration

• PPPoA/PPPoE Autosense for ATM PVCs

• PPPoE Circuit-Id Tag Processing

• PPPoE Client DDR Idle-Timer

• PPPoE Connection Throttling

• PPPoE Profiles

• PPPoE Relay

• PPPoE Service Selection

• PPPoE Session Limit

• PPPoE Session Limit Per NAS Port

• PPPoE Session Recovery After Reload

• PPPoE - QinQ Support

• Pseudowire Emulation Edge-to-Edge MIBs for Ethernet, Frame Relay, and ATM Services

• QoS: ATM Cell-Based Policer

• QoS: ATM-CLP and Layer 2 CoS-Based WRED

• QoS: Broadband Aggregation Enhancements—Phase 1: Start Here

• QoS: Color-Aware Policer

• QoS: Enhanced Show Commands for Active Policies

• QoS: Frame Relay QoS Hierarchical Queueing Framework Support on the Cisco 7200 Series Router

• QoS: Match on ATM CLP

• QoS: Percentage-Based and Time-Based Policing Parameters

• QoS: Percentage-Based Policing

• QoS: Percentage-Based Shaping

• QoS: Per-Session Shaping and Queuing on LNS

• QoS: Time-Based Thresholds for WRED and Queue Limit

• QoS: Tunnel Marking for L2TPv3 Tunnels

• RADIUS Accounting for QoS

• RADIUS Attribute 5 (NAS-Port) Format Specified on a Per-Server Group Level

• RADIUS Attribute 8 (Framed-IP-Address) in Access Requests

• RADIUS Attribute 66 (Tunnel-Client-Endpoint) Enhancements

• RADIUS Attribute 82: Tunnel Assignment ID

• RADIUS Attribute 104

• RADIUS Attribute Screening

• RADIUS Centralized Filter Management

• RADIUS EAP Support

• RADIUS Logical Line ID

• RADIUS NAS-IP-Address Attribute Configurability

• RADIUS Progress Codes

• RADIUS Route Download

• RADIUS Server Load Balancing
  The RADIUS server load balancing feature distributes authentication, authorization, and accounting (AAA) authentication and accounting transactions across servers in a server group.

• RADIUS Server Reorder on Failure

• RADIUS Timeout Set During Pre-Authentication

• Radius Tunnel Preference for Load Balancing and Fail-Over

• Reserve Memory for Console Access

• RFC-2867 RADIUS Tunnel Accounting

• RSVP Refresh Reduction and Reliable Messaging

• Lawful Intercept Architecture
  (formerly titled Service Independent Intercept)

• Shell-Based Authentication of VPDN Users

• Show Command Output Redirection

• Stateful Switchover

• Subscriber Service Switch

• TCP MSS Adjustment

• Timer and Retry Enhancements for L2TP and L2F

• Troubleshooting Enhancements for Multilink PPP over ATM Link Fragmentation and Interleaving

• Tunnel Authentication via RADIUS on LNS

• Two-Rate Policer

• UDP Forwarding Support of IP Redundancy Virtual Router Group

• Using 31-Bit Prefixes on IPv4 Point-to-Point Links

• Virtual Template Interfaces Limit Expansion

• VLANs over IP Unnumbered Subinterfaces

• VPDN Default Group Template

• VPDN Group Session Limiting

• VPDN Multihop by DNIS

• VRF-Aware VPDN Tunnels

• XML Interface to Syslog Messages

• MPLS LSP Ping/Traceroute for LDP/TE, and LSP Ping for VCCV