Table Of Contents
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Contents
Document Revision History
Supported Hardware
Supervisor Engines
Policy Feature Cards
Distributed and Centralized Forwarding Cards
10-Gigabit Ethernet Switching Modules
XENPAKs
Gigabit Ethernet Switching Modules
Small Form-Factor Pluggable Modules (SFPs)
10-Gigabit Ethernet Transceiver Modules
Gigabit Interface Converters (GBICs)
Power over Ethernet Daughtercards
10/100/1000 Ethernet Switching Modules
Fast Ethernet Switching Modules
Ethernet/Fast Ethernet (10/100) Switching Modules
Ethernet Switching Modules
Optical Services Modules (OSMs)
SPA Interface Processors (SIPs)
Shared Port Adapters (SPAs)
Circuit Emulation over Packet (CEoP) SPAs
Services SPA Carrier (SSC)
Services SPAs
Enhanced FlexWAN Module
Enhanced FlexWAN Module Port Adapters
Ethernet Services 20G Line Cards
Service Modules
Fan Trays
Power Supplies
Chassis
Unsupported Hardware
Unsupported Service Modules
Unsupported Port Adapters
Unsupported Supervisor Engines
Unsupported Policy Feature Cards and Distributed Forwarding Cards
Unsupported Line Cards
Unsupported Service Modules
Unsupported Chassis
Unsupported Power Supplies
Related Documentation
Cisco.com
Product Documentation DVD
Ordering Documentation
Documentation Feedback
Cisco Product Security Overview
Reporting Security Problems in Cisco Products
Product Alerts and Field Notices
Obtaining Technical Assistance
Cisco Support Website
Submitting a Service Request
Definitions of Service Request Severity
Obtaining Additional Publications and Information
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
This publication lists the supported hardware for Cisco 7600 series routers with Cisco IOS Release 12.2SR.
Use this publication with the Release Notes for Cisco IOS Release 12.2SRA on the Cisco 7600 Series Routers.
Contents
This publication contains these sections:
•
Document Revision History
• Supported Hardware
• Unsupported Hardware
• Related Documentation
• Obtaining Documentation
• Documentation Feedback
• Cisco Product Security Overview
• Product Alerts and Field Notices
• Obtaining Technical Assistance
• Obtaining Additional Publications and Information
Document Revision History
Revision
|
Date
|
Change Summary
|
OL-10362-3
|
June, 2007
|
Added the following for Cisco IOS release 12.2(33)SRB1:
•Cisco 7606-S router chassis
•Cisco 7603-S router chassis
•1500 W DC input (PWR-1500-DC) power supply
•XFP-10GZR-OC192LR Gigabit Ethernet Transceiver Module
|
OL-10362-2
|
February, 2007
|
Added the following for Cisco IOS release 12.2SRB:
•RSP 720
•Policy Feature Card 3C
•Policy Feature Card 3CXL
•Distributed Forwarding Card 3CXL
•SFP-GE-S, SFP-GE-L, SFP-GE-Z
•1-Port and 24-Port Channelized CEoP SPAs
•Ethernet Services 20G line cards
•Application Control Engine (ACE) Module
•Service Application Module for IP
•6000 W DC power supply
•Cisco 7609-S router chassis
|
OL-10362-1
|
May, 2006
|
Initial version
|
Supported Hardware
These sections describe the hardware supported in Cisco IOS Release 12.2SR:
• Supervisor Engines
• Policy Feature Cards
• Distributed and Centralized Forwarding Cards
• XENPAKs
• Gigabit Ethernet Switching Modules
• Small Form-Factor Pluggable Modules (SFPs)
• 10-Gigabit Ethernet Transceiver Modules
• Gigabit Interface Converters (GBICs)
• Power over Ethernet Daughtercards
• 10/100/1000 Ethernet Switching Modules
• Fast Ethernet Switching Modules
• Ethernet/Fast Ethernet (10/100) Switching Modules
• Ethernet Switching Modules
• Optical Services Modules (OSMs)
• SPA Interface Processors (SIPs)
• Shared Port Adapters (SPAs)
• Services SPA Carrier (SSC)
• Services SPAs
• Enhanced FlexWAN Module
• Enhanced FlexWAN Module Port Adapters
• Service Modules
• Fan Trays
• Power Supplies
• Chassis
Note•Use the values in the "Power Required" column to determine the exact power requirements for your configuration to ensure that you are within the power budget.
•Daughtercard power is shown separately.
•Enter the show power command to display current system power usage.
Supervisor Engines
• Supervisor Engine 720
• Supervisor Engine 32
• Route Switching Processor 720
Supervisor Engine 720
• Supervisor Engine 720 Common Features
• Supervisor Engine 720 with PFC3BXL
• Supervisor Engine 720 with PFC3B
Supervisor Engine 720 Common Features
•Integrated 720-Gbps Switch Fabric
•64-MB bootflash device
•2 CompactFlash Type II slots (disk0 and disk1)
Note Some Supervisor Engine 720 Release 12.2SR images are larger than the bootflash device and must be stored on a CompactFlash card.
•Two Ethernet uplink ports:
–1-MB packet buffer per port
–Port 1— Gigabit Ethernet SFP
–Port 2—Configurable as Gigabit Ethernet SFP or 10/100/1000 Mbps RJ-45
•QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
•Port grouping:
–Number of ports: 2
–Number of port groups: 1
–Port ranges per port group: 1-2
•Supervisor Engine 720 requires a high-capacity fan tray (see the "Fan Trays" section)
Supervisor Engine 720 with PFC3BXL
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-SUP720-3BXL
|
7.82 A@42 V
|
Supervisor Engine 720 with PFC3BXL:
•1-GB DRAM
•Policy Feature Card 3BXL (PFC3BXL); see the "Policy Feature Cards" section
•Multilayer Switch Feature Card 3 (MSFC3):
–1-GB DRAM
–64-MB bootflash
|
12.2(33)SRA
|
| |
Note There are no memory upgrade options for WS-SUP720-3BXL.
|
Supervisor Engine 720 with PFC3B
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-SUP720-3B
|
7.50 A@42 V
|
Supervisor Engine 720 with PFC3B:
•512-MB DRAM
•Policy Feature Card 3B (PFC3B); see the "Policy Feature Cards" section
•Multilayer Switch Feature Card 3 (MSFC3):
–512-MB DRAM
–64-MB bootflash
|
12.2(33)SRA
|
| |
Note
•There are no memory-only upgrade options for WS-SUP720-3B.
•Use WS-F6K-PFC3BXL= to upgrade a WS-SUP720-3B with a PFC3BXL. WS-F6K-PFC3BXL= includes 1 GB memory upgrades for the Supervisor Engine 720 and the MSFC3. Refer to this publication for more information:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_16220.htm
|
Supervisor Engine 32
Note Supervisor Engine 32 does not support this hardware:
•WS-SUP720-3B
•WS-F6K-PFC3BXL—Policy Feature Card 3BXL (PFC3BXL)
•Distributed Forwarding Cards (DFCs) (installed DFCs do not power up with a Supervisor Engine 32)
•Switch Fabric Modules
•These switching modules:
–WS-X6704-10GE—4-port 10-Gigabit Ethernet XENPAK
–WS-X6748-SFP—48-port Gigabit Ethernet SFP
–WS-X6724-SFP—24-port Gigabit Ethernet SFP
–WS-X6816-GBIC—16-port Gigabit Ethernet GBIC
–WS-X6748-GE-TX—48-port 10/100/1000 RJ-45
•7600-SIP-600—SPA Interface Processor-600
•Optical Services Modules (OSMs)
•CISCO7603—3-slot chassis
•These service modules:
–WS-SVC-AON-1-K9—Application-Oriented Networking Module
–WS-SVC-AGM-1-K9—Anomaly Guard Module
–WS-SVC-ADM-1-K9—Traffic Anomaly Detector Module
–WS-SVC-MWAM-1—Multi-Processor WAN Application Module
•Supervisor Engine 32 does not support these software features and commands:
–Protocol independent multicast (PIM) snooping designated-router flooding configurability
–NetFlow version 9
–Egress multicast replication
–Multicast replication mode detection
–All fabric configuration commands
Route Switching Processor 720
RSP 720 Common Features
•Two Gigabit Ethernet uplink ports: port 1 supports a 1-Gbps small form pluggable (SFP) module; port 2 is configurable with either a 1-Gbps SFP module or a 10/100/1000-Mbps RJ-45
•Integrated 720-Gbps switch fabric
•Two CompactFlash Type II slots (on front panel) and 2-GB internal CompactFlash (1 GB each for RP and SP)
•Requires larger power supplies and a high-speed fan tray
•QoS port architecture (Rx/Tx) is 1p1q4t/1p2q2t
RSP720-3C-GE
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
RSP720-3C-GE
|
6.66 A@42 V
|
Route Switch Processor 720 with PFC3C:
•Two Gigabit Ethernet uplink ports: port 1 supports a 1-Gbps small form pluggable (SFP) module; port 2 is configurable with either a 1-Gbps SFP module or a 10/100/1000-Mbps RJ-45
•Integrated 720-Gbps switch fabric
•PFC3C and MSFC4 with 512-MB bootflash, 4-MB NVRAM, 4-MB ROMMON, and several DRAM options:
–Route processor (RP): 1- to 4-GB DRAM (default 1 GB)
–Switch processor (SP): 1- to 2-GB DRAM (default 1 GB)
•2 CompactFlash Type II slots (on front panel) and 2-GB internal CompactFlash (1 GB each for RP and SP)
•Requires larger power supplies and a high-speed fan tray
•QoS port architecture (Rx/Tx) is 1p1q4t/1p2q2t
|
12.2(33)SRB
|
| |
Note
•There are no memory-only upgrade options for RSP720-3C-GE.
•The following hardware and features are not supported by the RSP720-3C-GE:
–CISCO7603 router, OSR-7609 router.
–Services modules, Optical Service Modules (OSMs), FlexWAN module (Enhanced FlexWAN module is supported).
–In-service software upgrade (ISSU) is not supported in Cisco IOS Release 12.2SRB.
–Server load balancing (SLB) is not supported.
|
RSP720-3CXL-GE
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
RSP720-3CXL-GE
|
7.33 A@42 V
|
Route Switch Processor 720 with PFC3CXL:
•Two Gigabit Ethernet uplink ports: port 1 supports a 1-Gbps small form pluggable (SFP) module; port 2 is configurable with either a 1-Gbps SFP module or a 10/100/1000-Mbps RJ-45
•Integrated 720-Gbps switch fabric
•PFC3CXL (high-capacity) and MSFC4 with 512-MB bootflash, 4-MB NVRAM, 4-MB ROMMON, and several DRAM options:
–Route processor (RP): 1- to 4-GB DRAM (default 2 GB)
–Switch processor (SP): 1- to 2-GB DRAM (default 1 GB)
•2 CompactFlash Type II slots (on front panel) and 2-GB internal CompactFlash (1 GB each for RP and SP)
•Requires larger power supplies and a high-speed fan tray
•QoS port architecture (Rx/Tx) is 1p1q4t/1p2q2t
|
12.2(33)SRB
|
| |
Note
•There are no memory-only upgrade options for RSP720-3CXL-GE.
•The following hardware and features are not supported by the RSP720-3CXL-GE :
–Unsupported chassis: CISCO7603, OSR-7609.
–Unsupported modules: Services modules, Optical Service Modules (OSMs), FlexWAN module (Enhanced FlexWAN module is supported).
–In-service software upgrade (ISSU) is not supported in Cisco IOS Release 12.2SRB.
–Server load balancing (SLB) is not supported.
|
Policy Feature Cards
• Policy Feature Card Guidelines and Restrictions
• Policy Feature Card 3BXL
• Policy Feature Card 3B
• Distributed and Centralized Forwarding Cards
Policy Feature Card Guidelines and Restrictions
•The PFC3 supports a theoretical maximum of 64,000 MAC addresses (32,000 MAC addresses recommended maximum).
•You cannot use one type of PFC3 (PFC3BXL or PFC3B) on one supervisor engine and a different type on the other supervisor engine for redundancy. You must use identical policy feature cards for redundancy.
•Enter the show platform hardware pfc mode command to display the PFC3 mode.
•Enter the show platform earl-mode command to display the PFC3 mode.
•PFC3B—These restrictions apply to a configuration with a PFC3B and these DFCs:
–PFC3B and DFC3B—No restrictions.
–PFC3B and DFC3BXL—The PFC3B restricts DFC3BXL functionality: after a reload with a DFC3BXL-equipped module installed, the DFC3BXL functions as a DFC3B.
•PFC3BXL—These restrictions apply to a configuration with a PFC3BXL and these DFCs:
–PFC3BXL and DFC3B—PFC3BXL functionality is restricted by the DFC3B: after a reload with a DFC3B-equipped module installed (whether powered up or down), the PFC3BXL functions as a PFC3B.
–PFC3BXL and DFC3BXL—No restrictions.
• The features that require the PFC3BXL or PFC3B are not supported in PFC3A mode (see the Release Notes for Cisco IOS Release 12.2SR on the Cisco 7600 Series Routers).
•To use DFC3B-equipped switching modules with a PFC3BXL, the DFC3B-equipped switching modules must be installed at bootup.
Policy Feature Card 3BXL
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-F6K-PFC3BXL
|
2.57 A@42 V
|
Policy Feature Card 3BXL (PFC3BXL)
|
| |
Supported only with Supervisor Engine 720
|
12.2(33)SRA
|
Note
•There are no memory upgrade options for WS-F6K-PFC3BXL.
•Use WS-F6K-PFC3BXL= to upgrade a WS-SUP720 or WS-SUP720-3B with a PFC3BXL. WS-F6K-PFC3BXL= includes 1 GB memory upgrades for the Supervisor Engine 720 and the MSFC3. Refer to this publication for more information:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_16220.htm
|
Policy Feature Card 3B
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-F6K-PFC3B
|
2.25 A@42 V
|
Policy Feature Card 3B (PFC3B)
|
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
Note
•There are no memory upgrade options for WS-F6K-PFC3B.
•Use WS-F6K-PFC3BXL= to upgrade a WS-SUP720-3B with a PFC3BXL. WS-F6K-PFC3BXL= includes 1 GB memory upgrades for the Supervisor Engine 720 and the MSFC3. Refer to this publication for more information:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_16220.htm
|
Policy Feature Card 3C
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-F6K-PFC3C
|
2.25 A@42 V
|
Policy Feature Card 3C (PFC3C)
|
| |
|
Supported only with RSP 720
|
12.2(33)SRB
|
Note
•There are no memory upgrade options for WS-F6K-PFC3C.
•Use WS-F6K-PFC3CXL= to upgrade a RSP720-3C-GE with a PFC3CXL. WS-F6K-PFC3CXL= includes 1 GB memory upgrades for the Route Switch Processor 720 and the MSFC4.
|
Policy Feature Card 3CXL
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-F6K-PFC3CXL
|
2.57 A@42 V
|
Policy Feature Card 3CXL (PFC3CXL)
|
| |
Supported only with RSP 720
|
12.2(33)SRB
|
Note
•There are no memory upgrade options for WS-F6K-PFC3BXL.
|
Distributed and Centralized Forwarding Cards
• Centralized Forwarding Card (WS-X6700-CFC)
• Distributed Forwarding Card 3BXL
• Distributed Forwarding Card 3B
• Distributed Forwarding Card 3CXL
• Distributed Forwarding Card 3C
Note See the "Route Switching Processor 720" section for Policy Feature Cards (PFC) and Distributed Forwarding Card (DFC) restrictions.
Centralized Forwarding Card (WS-X6700-CFC)
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-X6700-CFC
|
0.75 A@42 V
|
Centralized Forwarding Card (CFC) for use on CEF720 modules
|
| |
Supported only with Supervisor Engine 720
|
12.2(33)SRA
|
Note There are no memory upgrade options for WS-X6700-CFC.
|
Distributed Forwarding Card 3BXL
• WS-F6700-DFC3BXL
• WS-F6K-DFC3BXL
WS-F6700-DFC3BXL
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-F6700-DFC3BXL
|
3.30 A@42 V
|
Distributed Forwarding Card 3BXL (DFC3BXL) for use on CEF720 modules
|
| |
Supported only with Supervisor Engine 720
|
12.2(33)SRA
|
Note
•WS-F6700-DFC3BXL uses memory that is installed on the switching module.
•Refer to this publication for information about WS-F6700-DFC3BXL upgrades:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_15893.htm
|
WS-F6K-DFC3BXL
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-F6K-DFC3BXL
|
1.47 A@42 V
|
Distributed Forwarding Card 3BXL (DFC3BXL) for use on dCEF256 and CEF256 modules
|
| |
Supported with Supervisor Engine 720
|
12.2(33)SRA
|
| |
Supported with Route Switch Processor 720
|
12.2(33)SRB
|
Note
•Refer to this publication for information about WS-F6K-DFC3BXL memory upgrades:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_12409.htm
•Supervisor Engine 720 supports a WS-F6K-DFC3BXL on these WS-X6516-GBIC switching module hardware revisions:
–Lower than 5.0
–5.5 and higher
•Supervisor Engine 720 does not support a DFC3 on WS-X6516-GBIC switching module hardware revisions 5.0 through 5.4. With a Supervisor Engine 720 and with a DFC3 installed, WS-X6516-GBIC switching module hardware revisions 5.0 through 5.4 do not power up.
•With a Supervisor Engine 720 but without a DFC3, WS-X6516-GBIC switching module hardware revisions 5.0 through 5.4 operate in bus mode.
•Refer to external field notice 24494 for more information about Supervisor Engine 720 and a DFC3 on WS-X6516-GBIC switching modules:
http://www.cisco.com/warp/public/770/fn24494.shtml
|
Distributed Forwarding Card 3B
• WS-F6700-DFC3B
• WS-F6K-DFC3B
WS-F6700-DFC3B
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-F6700-DFC3B
|
3.00 A@42 V
|
Distributed Forwarding Card 3B (DFC3B) for use on CEF720 modules
|
| |
Supported only with Supervisor Engine 720
|
12.2(33)SRA
|
Note
•WS-F6700-DFC3B uses memory that is installed on the switching module.
•Refer to this publication for information about WS-F6700-DFC3B upgrades:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_15893.htm
|
WS-F6K-DFC3B
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-F6K-DFC3B
|
1.67 A@42 V
|
Distributed Forwarding Card 3B (DFC3B) for use on dCEF256 and CEF256 modules
|
| |
Supported with Supervisor Engine 720
|
12.2(33)SRA
|
| |
Supported with Route Switch Processor 720
|
12.2(33)SRB
|
Note
•Refer to this publication for information about WS-F6K-DFC3B memory upgrades:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_12409.htm
•Supervisor Engine 720 supports a WS-F6K-DFC3B on these WS-X6516-GBIC switching module hardware revisions:
–Lower than 5.0
–5.5 and higher
•Supervisor Engine 720 does not support a DFC3 on WS-X6516-GBIC switching module hardware revisions 5.0 through 5.4. With a Supervisor Engine 720 and with a DFC3 installed, WS-X6516-GBIC switching module hardware revisions 5.0 through 5.4 do not power up.
•With a Supervisor Engine 720 but without a DFC3, WS-X6516-GBIC switching module hardware revisions 5.0 through 5.4 operate in bus mode.
•Refer to external field notice 24494 for more information about Supervisor Engine 720 and a DFC3 on WS-X6516-GBIC switching modules:
http://www.cisco.com/warp/public/770/fn24494.shtml
|
Distributed Forwarding Card 3CXL
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-F6700-DFC3CXL
|
2.35 A@42 V
|
Distributed Forwarding Card 3CXL (DFC3CXL) for use on CEF720 modules
|
| |
Supported with Supervisor Engine 720 and Route Switch Processor 720
|
12.2(33)SRB
|
Distributed Forwarding Card 3C
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-F6700-DFC3C
|
1.65 A@42 V
|
Distributed Forwarding Card 3C (DFC3C) for use on CEF720 modules
|
| |
Supported with Supervisor Engine 720 and Route Switch Processor 720
|
12.2(33)SRB
|
10-Gigabit Ethernet Switching Modules
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-X6704-10GE
|
6.28 A@42 V
|
4-port 10-Gigabit Ethernet XENPAK
•CEF720 with WS-X6700-CFC (adds 0.75 A@42 V)
•dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V)
•dCEF720 with WS-F6700-DFC3B (adds 3.00 A@42 V)
•dCEF720 with WS-F6700-DFC3CXL (adds 2.35 A@42 V)
•Supports egress multicast replication
•QoS port architecture (Rx/Tx):
–With DFC3: 8q8t/1p7q8t
–With CFC: 1q8t/1p7q8t
•Number of ports: 4
Number of port groups: 4
Port ranges per port group: 1 port in each group
|
| |
Supported only with Supervisor Engine 720
|
12.2(33)SRA
|
Note
•WS-X6704-10GE requires one of the following:
– WS-F6700-DFC3BXL (3.30 A@42 V)
– WS-F6700-DFC3B (3.00 A@42 V)
– WS-X6700-CFC (0.75 A@42 V)
•WS-X6704-10GE ships with WS-X6700-CFC installed unless ordered with WS-F6700-DFC3BXL or WS-F6700-DFC3B.
•WS-X6704-10GE is supported in the WS-C6503-E chassis.
•WS-X6704-10GE is not supported in the WS-C6503 and CISCO7603 chassis.
•In a 13-slot chassis, WS-X6704-10GE is supported only in slots 9 through 13 and does not power up in other slots.
•On WS-X6704-10GE ports, Spanning Tree Protocol (STP) bridge protocol data units (BPDUs) are not exempt from Traffic Storm Control suppression. Do not configure Traffic Storm Control on STP-protected WS-X6704-10GE ports that interconnect network devices.
|
WS-X6502-10GE
|
3.30 A@42 V
|
1-port 10-Gigabit Ethernet
•With Supervisor Engine 720:
–dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V)
–dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V)
•QoS port architecture (Rx/Tx): 1p1q8t/1p2q1t
•Number of ports: 1
Number of port groups: 1
Port ranges per port group: 1 port in 1 group
|
|
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
Note WS-X6502-10GE does not support Inter-Switch Link (ISL) encapsulation.
|
Optical Interface Module (OIM) for WS-X6502-10GE
|
WS-G6488
|
10GBASE-LR serial 1310 nm long-reach OIM
|
12.2(33)SRA
|
WS-G6483
|
10GBASE-ER serial 1550 nm extended-reach OIM
|
12.2(33)SRA
|
XENPAKs
Product ID
(append "=" for spares)
|
Product Description
|
Minimum Software Version
|
DWDM-XENPAK
|
10GBASE dense wavelength division multiplexing (DWDM) 100-GHz ITU grid
|
12.2(33)SRA
|
WDM-XENPAK-REC
|
10GBASE receive-only wavelength division multiplexing (WDM)
|
12.2(33)SRA
|
XENPAK-10GB-CX4
|
10GBASE for CX4 cable
|
12.2(33)SRA
|
XENPAK-10GB-SR
|
10GBASE-SR Serial 850-nm short-reach multimode fiber (MMF)
|
12.2(33)SRA
|
XENPAK-10GB-LX4
|
10GBASE-LX4 Serial 1310-nm multimode fiber (MMF)
|
12.2(33)SRA
|
XENPAK-10GB-ER
|
10GBASE-ER Serial 1550-nm extended-reach, single-mode fiber (SMF), dispersion-shifted fiber (DSF)
|
12.2(33)SRA
|
Note XENPAK-10GB-ER units is not supported with Part Number 800-24557-01, as described in this external field notice (CSCee47030):
http://www.cisco.com/warp/public/770/fn29736.shtml
|
XENPAK-10GB-LR
|
10GBASE-LR Serial 1310-nm long-reach, single-mode fiber (SMF), dispersion-shifted fiber (DSF)
|
12.2(33)SRA
|
Gigabit Ethernet Switching Modules
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-X6748-SFP
|
5.32 A@42 V
|
48-port Gigabit Ethernet SFP
•CEF720 with WS-X6700-CFC (adds 0.75 A@42 V)
•dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V)
•dCEF720 with WS-F6700-DFC3B (adds 3.00 A@42 V)
•Supports egress multicast replication
•QoS architecture:
–With DFC3: 2q8t/1p3q8t
–With CFC: 1q8t/1p3q8t
•Number of ports: 48
Number of port groups: 4
Port ranges per port group:
1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23
2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
25, 27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47
26, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48
|
| |
Supported with Supervisor Engine 720
|
12.2(33)SRA
|
Supported with Route Switch Processor 720
|
12.2(33)SRB
|
Note
•WS-X6748-SFP requires one of the following:
– WS-F6700-DFC3BXL (3.30 A@42 V)
– WS-F6700-DFC3B (3.00 A@42 V)
– WS-X6700-CFC (0.75 A@42 V)
•WS-X6748-SFP ships with WS-X6700-CFC installed unless ordered with WS-F6700-DFC3BXL or WS-F6700-DFC3B.
•WS-X6748-SFP is supported in the WS-C6503-E chassis.
•WS-X6748-SFP is not supported in the WS-C6503 and CISCO7603 chassis.
•In a 13-slot chassis, WS-X6748-SFP is supported only in slots 9 through 13 and does not power up in other slots.
•On WS-X6748-SFP ports, STP BPDUs are not exempt from Traffic Storm Control suppression. Do not configure Traffic Storm Control on STP-protected WS-X6748-SFP ports that interconnect network devices.
•See the "Small Form-Factor Pluggable Modules (SFPs)" section.
|
WS-X6724-SFP
|
2.23 A@42 V
|
24-port Gigabit Ethernet SFP
•CEF720 with WS-X6700-CFC (adds 0.75 A@42 V)
•dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V)
•dCEF720 with WS-F6700-DFC3B (adds 3.00 A@42 V)
•Supports egress multicast replication
•QoS architecture:
–With DFC3: 2q8t/1p3q8t
–With CFC: 1q8t/1p3q8t
•Number of ports: 24
Number of port groups: 2
Port ranges per port group: 1-12, 13-24
|
| |
Supported only with Supervisor Engine 720
|
12.2(33)SRA
|
Note
•WS-X6724-SFP requires one of the following:
– WS-F6700-DFC3BXL (3.30 A@42 V)
– WS-F6700-DFC3B (3.00 A@42 V)
– WS-X6700-CFC (0.75 A@42 V)
•WS-X6724-SFP ships with WS-X6700-CFC installed unless ordered with WS-F6700-DFC3BXL or WS-F6700-DFC3B.
•WS-X6724-SFP is supported in the WS-C6503-E chassis.
•WS-X6724-SFP is not supported in the WS-C6503 and CISCO7603 chassis.
•On WS-X6724-SFP ports, STP BPDUs are not exempt from Traffic Storm Control suppression. Do not configure Traffic Storm Control on STP-protected WS-X6724-SFP ports that interconnect network devices.
•See the "Small Form-Factor Pluggable Modules (SFPs)" section.
|
WS-X6816-GBIC
|
3.84 A@42 V
|
16-port Gigabit Ethernet GBIC
|
|
| |
•dCEF256
•QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
Number of ports: 16
Number of port groups: 2
Port ranges per port group: 1-8, 9-16
|
|
With Supervisor Engine 720
|
12.2(33)SRA
|
With Route Switch Processor 720
|
12.2(33)SRB
|
Note
•WS-X6816-GBIC requires one of these for use with Supervisor Engine 720 and Route Switch Processor 720:
– WS-F6K-DFC3BXL (adds 1.47 A@42 V)
– WS-F6K-DFC3B (adds 1.67 A@42 V)
•In a 13-slot chassis, WS-X6816-GBIC is supported only in slots 9 through 13 and does not power up in other slots.
|
WS-X6516A-GBIC
|
3.62 A@42 V
|
16-port Gigabit Ethernet GBIC
•CEF256
•With Supervisor Engine 720:
–dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V)
–dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V)
•1-MB per-port packet buffers
•Supports egress multicast replication
•QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
•Number of ports: 16
Number of port groups: 2
Port ranges per port group: 1-8, 9-16
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-X6516-GBIC
|
3.40 A@42 V
|
16-port Gigabit Ethernet GBIC
•CEF256
•With Supervisor Engine 720:
–dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V)
–dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V)
•512-KB per-port packet buffers
•QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
•Number of ports: 16
Number of port groups: 2
Port ranges per port group: 1-8, 9-16
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
Note
•Supervisor Engine 720 supports a DFC3 on these WS-X6516-GBIC hardware revisions:
–Lower than 5.0
–5.5 and higher
•Supervisor Engine 720 does not support a DFC3 on WS-X6516-GBIC hardware revisions 5.0 through 5.4. With a Supervisor Engine 720 and with a DFC3 installed, WS-X6516-GBIC hardware revisions 5.0 through 5.4 do not power up.
•With a Supervisor Engine 720 but without a DFC3, WS-X6516-GBIC hardware revisions 5.0 through 5.4 operate in bus mode.
•Refer to external field notice 24494 for more information:
http://www.cisco.com/warp/public/770/fn24494.shtml
|
WS-X6416-GBIC
|
2.81 A@42 V
|
16-port Gigabit Ethernet GBIC
•QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
•Number of ports: 16
Number of port groups: 2
Port ranges per port group: 1-8, 9-16
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-X6416-GE-MT
|
2.50 A@42 V
|
16-Port Gigabit Ethernet MT-RJ
•QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
•Number of ports: 16
Number of port groups: 2
Port ranges per port group: 1-8, 9-16
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-X6316-GE-TX
|
5.15 A@42 V
|
16-port Gigabit Ethernet RJ-45
•QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
•Number of ports: 16
Number of port groups: 2
Port ranges per port group: 1-8, 9-16
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
Note Supervisor Engine 32 does not support WS-X6316-GE-TX.
|
WS-X6408A-GBIC
|
2.00 A@42 V
|
8-port Gigabit Ethernet GBIC
•QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
•Number of ports: 8
Number of port groups: 1
Port ranges per port group: 1-8
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-X6408-GBIC
|
2.00 A@42 V
|
8-port Gigabit Ethernet GBIC
•QoS port architecture (Rx/Tx): 1q4t/2q2t
•Number of ports: 8
Number of port groups: 1
Port ranges per port group: 1-8
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
Small Form-Factor Pluggable Modules (SFPs)
These sections describe SFPs:
• Gigabit Ethernet SFPs
• Fast Ethernet SFPs
Gigabit Ethernet SFPs
Product ID
(append "=" for spares)
|
Product Description
|
Minimum Software Version
|
GLC-ZX-SM
|
1000BASE-ZX SFP
|
12.2(33)SRA
|
CWDM-SFP
|
1000BASE-CWDM SFP
|
12.2(33)SRA
|
GLC-T
|
1000BASE-T SFP
|
12.2(33)SRA
|
GLC-LH-SM
|
1000BASE-LX/LH SFP
|
12.2(33)SRA
|
GLC-SX-MM
|
1000BASE-SX SFP
|
12.2(33)SRA
|
SFP-GE-S
|
1000BASE-SX SFP
|
12.2(33)SRA
|
SFP-GE-L
|
1000BASE-LX/LH SFP
|
12.2(33)SRA
|
SFP-GE-Z
|
1000BASE-ZX SFP
|
12.2(33)SRA
|
Fast Ethernet SFPs
Note Only WS-X6148-FE-SFP supports these Fast Ethernet SFPs.
Product ID
(append "=" for spares)
|
Product Description
|
Minimum Software Version
|
GLC-FE-100FX
|
100BASEFX SFP
|
12.2(33)SRA
|
GLC-FE-100LX
|
100BASELX SFP
|
12.2(33)SRA
|
10-Gigabit Ethernet Transceiver Modules
Product ID
(append "=" for spares)
|
Product Description
|
Minimum Software Version
|
FP-10GLR-OC192SR
|
Cisco multirate XFP transceiver module for 10GBASE-LR Ethernet and OC-192/STM-64 short-reach (SR-1) Packet-over-SONET/SDH (POS) applications, SMF, dual LC connector
|
12.2(33)SRA
|
XFP-10GER-OC192IR
|
Cisco multirate XFP transceiver module for 10GBASE-ER Ethernet and OC-192/STM-64 intermediate-reach (IR-2) Packet-over-SONET/SDH (POS) applications, SMF, dual LC connector
|
12.2(33)SRA
|
XFP-10GZR-OC192LR
|
Cisco multirate XFP transceiver module for 10GBASE-LR Ethernet and OC-192/STM-64 long-reach Packet-over-SONET/SDH (POS) applications, SMF, dual LC connector
|
12.2(33)SRB1
|
Gigabit Interface Converters (GBICs)
Note The support listed in this section applies to all modules that use GBICs, including OSM LAN ports and OSM Gigabit Ethernet WAN ports.
Product ID
(append "=" for spares)
|
Product Description
|
Minimum Software Version
|
WDM-GBIC-REC
|
Receive-only wavelength division multiplexing (WDM) GBIC
|
12.2(33)SRA
|
DWDM-GBIC
|
Dense wavelength division multiplexing (DWDM) GBIC
|
12.2(33)SRA
|
CWDM-GBIC
|
Coarse wavelength division multiplexing (CWDM) GBIC
|
12.2(33)SRA
|
WS-G5483
|
1000BASET GBIC
|
12.2(33)SRA
|
WS-G5484
|
Short wavelength, 1000BASE-SX
|
12.2(33)SRA
|
WS-G5486
|
Long wavelength/long haul, 1000BASE-LX/LH
|
12.2(33)SRA
|
WS-G5487
|
Extended distance, 1000BASE-ZX
|
12.2(33)SRA
|
Power over Ethernet Daughtercards
Note•The Power over Ethernet (PoE) daughtercard "Power Required" values do not include the power drawn by phones.
•Refer to this publication for more information about POE:
http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper0900aecd80233a77.shtml
10/100/1000 Ethernet Switching Modules
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-X6748-GE-TX
|
7.00 A@42 V
|
48-port 10/100/1000 RJ-45
•CEF720 with WS-X6700-CFC (adds 0.75 A@42 V)
•dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V)
•dCEF720 with WS-F6700-DFC3B (adds 3.00 A@42 V)
•Supports egress multicast replication
•QoS architecture:
–With DFC3: 2q8t/1p3q8t
–With CFC: 1q8t/1p3q8t
•Number of ports: 48
Number of port groups: 4
Port ranges per port group: 1-12, 13-24, 25-36, 37-48
|
| |
Supported only with Supervisor Engine 720
|
12.2(33)SRA
|
Note
•WS-X6748-GE-TX requires one of the following:
– WS-F6700-DFC3BXL (3.30 A@42 V)
– WS-F6700-DFC3B (3.00 A@42 V)
– WS-X6700-CFC (0.75 A@42 V)
•WS-X6748-GE-TX ships with WS-X6700-CFC installed unless ordered with WS-F6700-DFC3BXL or WS-F6700-DFC3B.
•WS-X6748-GE-TX is supported in the WS-C6503-E chassis.
•WS-X6748-GE-TX is not supported in the WS-C6503 and CISCO7603 chassis.
•In a 13-slot chassis, WS-X6748-GE-TX is supported only in slots 9 through 13 and does not power up in other slots.
•On WS-X6748-GE-TX ports, STP BPDUs are not exempt from Traffic Storm Control suppression. Do not configure Traffic Storm Control on STP-protected WS-X6748-GE-TX ports that interconnect network devices.
|
WS-X6548-GE-TX
|
2.98 A@42 V
|
48-port 10/100/1000 Mbps
•RJ-45
•CEF256
•WS-X6548-GE-TX supports WS-F6K-VPWR-GE and WS-F6K-GE48-AF
•WS-X6548V-GE-TX supports WS-F6K-VPWR-GE
•WS-X6548-GE-45AF has WS-F6K-GE48-AF
•QoS port architecture (Rx/Tx): 1q2t/1p2q2t
Number of ports: 48
Number of port groups: 2
Port ranges per port group: 1-24, 25-48
|
WS-X6548V-GE-TX
|
3.40 A@42 V
|
WS-X6548-GE-45AF
|
3.16 A@42 V
|
| |
With Supervisor Engine 720
(except WS-F6K-GE48-AF)
|
12.2(33)SRA
|
WS-F6K-GE48-AF with Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-F6K-GE48-AF with Supervisor Engine 32
|
12.2(33)SRA
|
Note
•More than 1 Gbps of traffic per EtherChannel is supported on the WS-X6548-GE-TX (and voice-power daughtercard-equipped) switching modules.
•WS-X6548-GE-TX and WS-X6548V-GE-TX do not support these features:
–ISL trunking
–Jumbo frames
–802.1Q tunneling
–Traffic storm control
|
WS-X6148A-GE-TX
|
2.50 A@42 V
|
48-port 10/100/1000 Mbps
•RJ-45
•WS-X6148A-GE-TX supports WS-F6K-GE48-AF
•WS-X6148A-GE-45AF has WS-F6K-GE48-AF
•QoS port architecture (Rx/Tx): 1q2t/1p2q2t
•Number of ports: 48
Number of port groups: 2
Port ranges per port group: 1-24, 25-48
|
|
WS-X6148-GE-45AF
|
2.68 A@42 V
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
| |
With Supervisor Engine 32
|
12.2(33)SRA
|
Note WS-X6148A-GE-TX and WS-X6148A-GE-45AF do not support these features:
•More than 1 Gbps of traffic per EtherChannel
• WS-F6K-DFC3B, or WS-F6K-DFC3BXL
•ISL trunking
•Traffic storm control
|
WS-X6148-GE-TX
|
2.47 A@42 V
|
48-port 10/100/1000 Mbps
|
WS-X6148V-GE-TX
|
2.89 A@42 V
|
•RJ-45
|
WS-X6148-GE-45AF
|
2.65 A@42 V
|
•WS-X6148-GE-TX supports WS-F6K-VPWR-GE and WS-F6K-GE48-AF
|
| |
•WS-X6148V-GE-TX has WS-F6K-VPWR-GE
•WS-X6148-GE-45AF has WS-F6K-GE48-AF
•QoS port architecture (Rx/Tx): 1q2t/1p2q2t
•Number of ports: 48
Number of port groups: 2
Port ranges per port group: 1-24, 25-48
|
|
With Supervisor Engine 720
(except WS-F6K-GE48-AF)
|
12.2(33)SRA
|
WS-F6K-GE48-AF with Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-F6K-GE48-AF with Supervisor Engine 32
|
12.2(33)SRA
|
Note WS-X6148-GE-TX, WS-X6148V-GE-TX, and WS-X6148-GE-45AF do not support these features:
•More than 1 Gbps of traffic per EtherChannel
• WS-F6K-DFC3B, or WS-F6K-DFC3BXL
•ISL trunking
•Jumbo frames
•802.1Q tunneling
•Traffic storm control
|
WS-X6516-GE-TX
|
3.45 A@42 V
|
16-port 10/100/1000BASE-T
•CEF256
•With Supervisor Engine 720:
–dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V)
–dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V)
•QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
•Number of ports: 16
Number of port groups: 2
Port ranges per port group: 1-8, 9-16
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
Fast Ethernet Switching Modules
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-X6148-FE-SFP
|
2.30 A@42 V
|
48-port 100BASE-FX
•Requires Fast Ethernet SFPs
•QoS port architecture (Rx/Tx): 1p1q4t/1p3q8t
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-X6524-100FX-MM
|
1.90 A@42 V
|
24-port 100FX Ethernet multimode
•CEF256
•With Supervisor Engine 720:
–dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V)
–dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V)
•QoS port architecture (Rx/Tx): 1p1q0t/1p3q1t
•Number of ports: 24
Number of port groups: 1
Port ranges per port group: 1-24
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-X6324-100FX-SM
|
1.52 A@42 V
|
24-port 100FX Ethernet
|
WS-X6324-100FX-MM
|
1.52 A@42 V
|
•Single-mode and multimode MT-RJ
•128-KB per-port packet buffers
•QoS port architecture (Rx/Tx): 1q4t/2q2t
•Number of ports: 24
Number of port groups: 2
Port ranges per port group: 1-12, 13-24
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-X6224-100FX-MT
|
1.90 A@42 V
|
24-port 100FX Ethernet Multimode MT-RJ
•QoS port architecture (Rx/Tx): 1q4t/2q2t
•Number of ports: 24
Number of port groups: 2
Port ranges per port group: 1-12, 13-24
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
Ethernet/Fast Ethernet (10/100) Switching Modules
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-X6548-RJ-45
|
2.90 A@42 V
|
48-port 10/100TX RJ-45
•CEF256
•With Supervisor Engine 720:
–dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V)
–dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V)
•QoS port architecture (Rx/Tx): 1p1q0t/1p3q1t
•Number of ports: 48
Number of port groups: 1
Port ranges per port group: 1-48
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-X6548-RJ-21
|
2.90 A@42 V
|
48-port 10/100TX RJ-21
•CEF256
•With Supervisor Engine 720:
–dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V)
–dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V)
•QoS port architecture (Rx/Tx): 1p1q0t/1p3q1t
•Number of ports: 48
Number of port groups: 1
Port ranges per port group: 1-48
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-X6148X2-RJ-45
|
2.65 A@42 V
|
96-port 10/100TX RJ-45
|
|
WS-X6148X2-45AF
|
2.92 A@42 V
|
•QoS port architecture (Rx/Tx): 1p1q0t/1p3q1t
•WS-X6148X2-RJ-45 supports WS-F6K-FE48X2-AF
•WS-X6148X2-45AF has WS-F6K-FE48X2-AF
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-X6196-RJ-21
|
2.74 A@42 V
|
96-port 10/100TX RJ-21
|
|
WS-X6196-21AF
|
3.16 A@42 V
|
•QoS port architecture (Rx/Tx): 1p1q0t/1p3q1t
|
|
| |
•WS-X6196-RJ-21 supports WS-F6K-FE48X2-AF
|
|
•WS-X6196-21AF has WS-F6K-FE48X2-AF
|
|
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-X6348-RJ-45
|
2.39 A@42 V
|
48-port 10/100TX RJ-45
|
WS-X6348-RJ-45V
|
2.39 A@42 V
|
•128-KB per-port packet buffers
|
| |
•QoS port architecture (Rx/Tx): 1q4t/2q2t
|
•WS-X6348-RJ-45 supports WS-F6K-VPWR
|
•WS-X6348-RJ-45V has WS-F6K-VPWR
|
•Number of ports: 48
Number of port groups: 4
Port ranges per port group: 1-12, 13-24, 25-36, 37-48
|
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-X6348-RJ-21V
|
2.39 A@42 V
|
48-port 10/100TX RJ-21
•128-KB per-port packet buffers
•QoS port architecture (Rx/Tx): 1q4t/2q2t
•Has WS-F6K-VPWR
•Number of ports: 48
Number of port groups: 4
Port ranges per port group: 1-12, 13-24, 25-36, 37-48
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-X6248-RJ-45
|
2.69 A@42 V
|
48-port 10/100TX RJ-45
•QoS port architecture (Rx/Tx): 1q4t/2q2t
•Number of ports: 48
Number of port groups: 4
Port ranges per port group: 1-12, 13-24, 25-36, 37-48
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-X6248A-TEL
|
2.69 A@42 V
|
48-port 10/100TX RJ-21
•128-KB per-port packet buffers
•QoS port architecture (Rx/Tx): 1q4t/2q2t
•Number of ports: 48
Number of port groups: 4
Port ranges per port group: 1-12, 13-24, 25-36, 37-48
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
| |
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-X6248-TEL
|
2.69 A@42 V
|
48-port 10/100TX RJ-21
•QoS port architecture (Rx/Tx): 1q4t/2q2t
•Number of ports: 48
Number of port groups: 4
Port ranges per port group: 1-12, 13-24, 25-36, 37-48
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-X6148A-RJ-45
WS-X6148A-45AF
|
2.39 A@42 V
2.57 A@42 V
|
48-port 10/100TX RJ-45
•128-KB per-port packet buffers
•QoS port architecture (Rx/Tx): 1q4t/2q2t
•WS-X6148A-RJ-45 supports WS-F6K-GE48-AF
•WS-X6148A-45AF has WS-F6K-GE48-AF
•Number of ports: 48
Number of port groups: 4
Port ranges per port group: 1-12, 13-24, 25-36, 37-48
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-X6148-RJ-45
|
2.39 A@42 V
|
48-port 10/100TX RJ-45
|
WS-X6148-RJ-45V
|
2.39 A@42 V
|
128-KB per-port packet buffers
|
WS-X6148-45AF
|
2.57 A@42 V
|
QoS port architecture (Rx/Tx): 1q4t/2q2t
•WS-X6148-RJ-45 supports WS-F6K-VPWR and WS-F6K-GE48-AF
•WS-X6148-RJ-45V has WS-F6K-VPWR
•WS-X6148-45AF has WS-F6K-GE48-AF
•Number of ports: 48
Number of port groups: 4
Port ranges per port group: 1-12, 13-24, 25-36, 37-48
|
| |
With Supervisor Engine 720
(except with WS-F6K-GE48-AF)
|
12.2(33)SRA
|
WS-F6K-GE48-AF with Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-F6K-GE48-AF with Supervisor Engine 32
|
12.2(33)SRA
|
WS-X6148-RJ-21
|
2.39 A@42 V
|
48-port 10/100TX RJ-21
|
WS-X6148-RJ-21V
|
2.39 A@42 V
|
•128-KB per-port packet buffers
|
WS-X6148-21AF
|
2.57 A@42 V
|
•QoS port architecture (Rx/Tx): 1q4t/2q2t
•WS-X6148-RJ-21 supports WS-F6K-VPWR and WS-F6K-GE48-AF
•WS-X6148-RJ-21V has WS-F6K-VPWR
•WS-X6148-21AF has WS-F6K-GE48-AF
•Number of ports: 48
Number of port groups: 4
Port ranges per port group: 1-12, 13-24, 25-36, 37-48
|
| |
With Supervisor Engine 720
(except WS-F6K-GE48-AF)
|
12.2(33)SRA
|
WS-F6K-GE48-AF with Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-F6K-GE48-AF with Supervisor Engine 32
|
12.2(33)SRA
|
Ethernet Switching Modules
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-X6024-10FL-MT
|
1.52 A@42 V
|
24-port 10BASE-FL MT-RJ
•QoS port architecture (Rx/Tx): 1q4t/2q2t
•Number of ports: 24
Number of port groups: 2
Port ranges per port group: 1-12, 13-24
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
Optical Services Modules (OSMs)
• OSM Guidelines and Restrictions
• Gigabit Ethernet WAN
• OC-48 Packet over SONET
• OC-48 DPT/Packet over SONET
• OC-12 Packet over SONET
• OC-3 Packet over SONET
• OC-12 Channelized
• CT3/T1 Channelized/Unchannelized
• OC-12 ATM
OSM Guidelines and Restrictions
•Supervisor Engine 32 does not support OSMs.
•OSMs require a minimum of 128 MB of synchronous dynamic random-access memory (SDRAM) —Refer to this publication for memory upgrade procedures:
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/hardware/osmodule/app_upgr.htm
•OSMs are CEF256 modules.
•OSM WAN port numbering starts with 1.
•On OSMs with Gigabit Ethernet GBIC Layer 2 LAN ports:
–OSM LAN port numbering starts with 1.
–The LAN ports are in a single port group.
•The OSM-2+4GE-WAN+ and the OC-12 Packet-over-SONET OSMs have been tested with the service modules and WS-SUP720.
Gigabit Ethernet WAN
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
OSM-2+4GE-WAN+
|
5.08 A@42 V
|
4-port Gigabit Ethernet WAN (GBIC) with two Layer 2 LAN ports; CEF256
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
OC-48 Packet over SONET
Note Also has four Layer 2 LAN ports.
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
OSM-1OC48-POS-SI+
OSM-1OC48-POS-SL+
OSM-1OC48-POS-SS+
|
3.90 A@42 V
|
Enhanced 1-port OC-48/STM-16 SONET/SDH OSM, SM-IR; CEF256
Enhanced 1-port OC-48/STM-16 SONET/SDH OSM, SM-LR; CEF256
Enhanced 1-port OC-48/STM-16 SONET/SDH OSM, SM-SR; CEF256
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
OC-48 DPT/Packet over SONET
Note Also has four Layer 2 LAN ports.
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
OSM-2OC48/1DPT-SS
OSM-2OC48/1DPT-SI
OSM-2OC48/1DPT-SL
|
5.75 A@42 V
|
2-port OC-48 DPT/POS, SM-SR; CEF256
2-port OC-48 DPT/POS, SM-IR; CEF256
2-port OC-48 DPT/POS, SM-LR; CEF256
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
OC-12 Packet over SONET
Note Also has four Layer 2 LAN ports.
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
OSM-4OC12-POS-SI+
|
4.55 A@42 V
|
Enhanced 4-port OC-12c/STM-4c POS, SM-IR; CEF256
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
OSM-2OC12-POS-SI+
|
3.36 A@42 V
|
Enhanced 2-port OC-12c/STM-4c POS, SM-IR; CEF256
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
OC-3 Packet over SONET
Note Also has four Layer 2 LAN ports.
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
OSM-16OC3-POS-SI+
|
4.80 A@42 V
|
Enhanced 16-port OC-3c/STM-1c POS, SM-IR; CEF256
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
OSM-8OC3-POS-SI+
OSM-8OC3-POS-SL+
|
3.57 A@42 V
|
Enhanced 8-port OC-3c/STM-1c POS, SM-IR; CEF256
Enhanced 8-port OC-3c/STM-1c POS, SM-LR; CEF256
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
OSM-4OC3-POS-SI+
|
2.44 A@42 V
|
Enhanced 4-port OC-3c/STM-1c POS, SM-IR; CEF256
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
OC-12 Channelized
Note Also has four Layer 2 LAN ports.
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
OSM-1CHOC12/T3-SI
OSM-1CHOC12/T1-SI
|
4.40 A@42 V
2.80 A@42 V
|
1-port channelized OC-12, SM-IR; CEF256
1-port channelized OC-12, SM-IR; CEF256
|
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
CT3/T1 Channelized/Unchannelized
Note OSM-12CT3/T1 has mini-SMB connectors for use with 75-ohm copper coaxial cable.
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
OSM-12CT3/T1
|
2.80 A@42 V
|
12-port channelized/unchannelized CT3/T1; CEF256
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
OC-12 ATM
Note Also has four Layer 2 LAN ports.
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
OSM-2OC12-ATM-MM+
OSM-2OC12-ATM-SI+
|
4.00 A@42 V
|
Enhanced 2-port OC-12/STM-4 ATM OSM, MM; CEF256
Enhanced 2-port OC-12/STM-4 ATM OSM, SM-IR; CEF256
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
SPA Interface Processors (SIPs)
Note See the Release Notes for Cisco IOS Release 12.2SR on the Cisco 7600 Series Routers for information about additional procedures required to support SIPs with Cisco IOS Release 12.2(33)SRA and later releases.
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
7600-SIP-600
|
8.14 A@42 V
|
SPA Interface Processor-600
|
Supported only with Supervisor Engine 720
|
12.2(33)SRA
|
Note Supervisor Engine 32 does not support 7600-SIP-600.
|
7600-SIP-400
|
6.31 A@42 V
|
SPA Interface Processor-400
|
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
Note For release 12.2(33)SRA, the total supported bandwidth for the SIP-400 is 4 Gigabits line rate for Ethernet and 2.5 Gigabits line rate for SONET with selected services. There is no oversubscription support. The product ordering tools would prevent combination of SPAs that add up to more than this bandwidth and would reject such configurations. For release 12.2(33)SRB, oversubscription is supported.
|
7600-SIP-200
|
5.72 A@42 V
|
SPA Interface Processor-200
|
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
Shared Port Adapters (SPAs)
These sections describe SPAs:
• Ethernet SPAs
• POS SPAs
• ATM SPAs
• Serial SPAs
• Circuit Emulation over Packet (CEoP) SPAs
Ethernet SPAs
These sections describe Ethernet SPAs:
• Ten Gigabit Ethernet SPAs
• Gigabit Ethernet SPAs
• Fast Ethernet SPAs
Ten Gigabit Ethernet SPAs
Product ID
(append "=" for spares)
|
SIP Support
|
Product Description
|
Minimum Software Version
|
SPA-1XTENGE-XFP
|
7600-SIP-600
|
1-port 10 Gigabit Ethernet SPA, LANPHY XFP Optics
|
12.2(33)SRA
|
SPA-1XTENGE-XFP-V2
|
7600-SIP-600
|
1-port 10 Gigabit Ethernet SPA, LANPHY XFP Optics
|
12.2(33)SRA
|
| |
XFP Modules Supported in SPA-1XTENGE-XFP
|
| |
XFP-10GLR-OC192SR
|
12.2(33)SRA
|
| |
|
XFP-10GER-OC192IR
|
12.2(33)SRA
|
| |
|
XFP-10GZR-OC192LR
|
12.2(33)SRB1
|
Gigabit Ethernet SPAs
Product ID
(append "=" for spares)
|
SIP Support
|
Product Description
|
Minimum Software Version
|
SPA-10X1GE
|
7600-SIP-600
|
10-port Gigabit Ethernet SPA, SFP Optics
|
12.2(33)SRA
|
SPA-10X1GE-V2
|
7600-SIP-600
|
10-port Gigabit Ethernet SPA, SFP Optics
|
12.2(33)SRA
|
SPA-5X1GE
|
7600-SIP-600
|
5-port Gigabit Ethernet SPA, SFP Optics
|
12.2(33)SRA
|
SPA-5X1GE-V2
|
7600-SIP-600
|
5-port Gigabit Ethernet SPA, SFP Optics
|
12.2(33)SRA
|
SPA-5X1GE-V2
|
7600-SIP-400
|
5-port Gigabit Ethernet SPA, SFP Optics
|
12.2(33)SRB
|
SPA-2X1GE
|
7600-SIP-400
|
2-port Gigabit Ethernet SPA, SFP Optics
|
12.2(33)SRA
|
SPA-2X1GE-V2
|
7600-SIP-400
|
2-port Gigabit Ethernet SPA, SFP Optics
|
12.2(33)SRB
|
| |
SFPs Supported in Gigabit Ethernet SPAs
|
| |
SFP-GE-S
|
12.2(33)SRA
|
|
SFP-GE-L
|
12.2(33)SRA
|
|
SFP-GE-Z
|
12.2(33)SRA
|
Fast Ethernet SPAs
Product ID
(append "=" for spares)
|
SIP Support
|
Product Description
|
Minimum Software Version
|
SPA-4X1FE-TX-V2
|
7600-SIP-200
|
4-port 10/100 Ethernet SPA TX
|
12.2(33)SRA
|
SPA-8X1FE-TX-V2
|
7600-SIP-200
|
8-port 10/100 Ethernet SPA TX
|
12.2(33)SRA
|
POS SPAs
Product ID
(append "=" for spares)
|
SIP Support
|
Product Description
|
Minimum Software Version
|
SPA-2XOC3-POS
|
7600-SIP-200
7600-SIP-400
|
2-port OC-3c/STM-1c POS SPA
|
12.2(33)SRA
|
| |
SFP Modules Supported in SPA-2XOC3-POS
|
| |
SFP-OC3-MM
|
12.2(33)SRA
|
| |
SFP-OC3-SR
|
12.2(33)SRA
|
| |
SFP-OC3-IR1
|
12.2(33)SRA
|
| |
SFP-OC3-LR1
|
12.2(33)SRA
|
| |
SFP-OC3-LR2
|
12.2(33)SRA
|
SPA-4XOC3-POS
|
7600-SIP-200
7600-SIP-400
|
4-port OC-3c/STM-1c POS SPA
|
12.2(33)SRA
|
| |
SFP Modules Supported in SPA-4XOC3-POS SPAs
|
| |
SFP-OC3-MM
|
12.2(33)SRA
|
| |
SFP-OC3-SR
|
12.2(33)SRA
|
| |
SFP-OC3-IR1
|
12.2(33)SRA
|
| |
SFP-OC3-LR1
|
12.2(33)SRA
|
| |
SFP-OC3-LR2
|
12.2(33)SRA
|
SPA-1XOC12-POS
|
7600-SIP-400
|
1-port OC-12c/STM-4c POS SPA
|
12.2(33)SRA
|
| |
SFP Modules Supported in SPA-1XOC12-POS SPA
|
| |
SFP-OC12-MM
|
12.2(33)SRA
|
| |
SFP-OC12-SR
|
12.2(33)SRA
|
| |
SFP-OC12-IR1
|
12.2(33)SRA
|
| |
SFP-OC12-LR1
|
12.2(33)SRA
|
| |
SFP-OC12-LR2
|
12.2(33)SRA
|
SPA-OC192POS-LR
|
7600-SIP-600
|
1-port OC-192c/STM-64 POS/RPR SPA, SM-LR
|
12.2(33)SRA
|
SPA-OC192POS-XFP
|
7600-SIP-600
|
1-port OC-192c/STM-64 POS/RPR SPA, XFP Optics
|
12.2(33)SRA
|
| |
XFP Modules Supported in SPA-OC192POS-XFP SPA
|
| |
XFP-10GLR-OC192SR
|
12.2(33)SRA
|
| |
XFP-10GER-OC192IR
|
12.2(33)SRA
|
| |
|
XFP-10GZR-OC192LR
|
12.2(33)SRB1
|
SPA-1XOC48POS/RPR
|
7600-SIP-400
|
1-port OC-48c/STM-16 SPA
|
12.2(33)SRA
|
| |
SFP Modules Supported in SPA-1XOC48POS/RPR SPA
|
| |
SFP-OC48-SR
|
12.2(33)SRA
|
| |
SFP-OC48-IR1
|
12.2(33)SRA
|
| |
SFP-OC48-LR2
|
12.2(33)SRA
|
SPA-2XOC48POS/RPR
|
7600-SIP-600
|
2 port OC-48 POS/RPR SPA with SFP Optics
|
12.2(33)SRA
|
| |
SFP Modules Supported in SPA-2XOC48POS/RPR SPA
|
| |
SFP-OC48-SR
|
12.2(33)SRA
|
| |
SFP-OC48-IR1
|
12.2(33)SRA
|
| |
SFP-OC48-LR2
|
12.2(33)SRA
|
SPA-4XOC48POS/RPR
|
7600-SIP-600
|
4-port OC-48c/STM-16 POS/DPT/RPR SPA
|
12.2(33)SRA
|
| |
SFP Modules Supported in SPA-4XOC48POS/RPR
|
| |
SFP-OC48-SR
|
12.2(33)SRA
|
| |
SFP-OC48-IR1
|
12.2(33)SRA
|
| |
SFP-OC48-LR2
|
12.2(33)SRA
|
ATM SPAs
Product ID
(append "=" for spares)
|
SIP Support
|
Product Description
|
Minimum Software Version
|
SPA-2XOC3-ATM
|
7600-SIP-200
7600-SIP-400
|
2-port OC-3c/STM-1c ATM SPA
|
12.2(33)SRA
|
| |
SFP Modules Supported in SPA-2XOC3-ATM
|
| |
SFP-OC3-MM
|
12.2(33)SRA
|
| |
SFP-OC3-IR1
|
12.2(33)SRA
|
| |
SFP-OC3-LR1
|
12.2(33)SRA
|
| |
SFP-OC3-LR2
|
12.2(33)SRA
|
SPA-4XOC3-ATM
|
7600-SIP-200
7600-SIP-400
|
4-port OC-3c/STM-1c ATM SPA
|
12.2(33)SRA
|
| |
SFP Modules Supported in SPA-4XOC3-ATM
|
| |
SFP-OC3-MM
|
12.2(33)SRA
|
| |
SFP-OC3-IR1
|
12.2(33)SRA
|
| |
SFP-OC3-LR1
|
12.2(33)SRA
|
| |
SFP-OC3-LR2
|
12.2(33)SRA
|
SPA-1XOC12-ATM
|
7600-SIP-400
|
1-Port OC-12c/STM-4c ATM SPA
|
12.2(33)SRA
|
| |
SFP Modules Supported in SPA-1XOC12-ATM SPA
|
|
| |
SFP-OC12-MM
|
12.2(33)SRA
|
| |
SFP-OC12-SR
|
12.2(33)SRA
|
| |
SFP-OC12-IR1
|
12.2(33)SRA
|
| |
SFP-OC12-LR1
|
12.2(33)SRA
|
| |
SFP-OC12-LR2
|
12.2(33)SRA
|
SPA-1XOC48-ATM
|
7600-SIP-400
|
1 port OC-48c/STM-16 ATM SPA
|
12.2(33)SRA
|
Serial SPAs
Product ID
(append "=" for spares)
|
SIP Support
|
Product Description
|
Minimum Software Version
|
SPA-8XCHT1/E1
|
7600-SIP-200
|
8-Port Channelized T1/E1 SPA
|
12.2(33)SRA
|
SPA-2XT3/E3
|
7600-SIP-200
|
2-port Clear Channel T3/E3 SPA
|
12.2(33)SRA
|
SPA-4XT3/E3
|
7600-SIP-200
|
4-port Clear Channel T3/E3 SPA
|
12.2(33)SRA
|
SPA-2XCT3/DS0
|
7600-SIP-200
|
2-port Channelized T3 to DS0 SPA
|
12.2(33)SRA
|
SPA-4XCT3/DS0
|
7600-SIP-200
|
4-port Channelized T3 to DS0 SPA
|
12.2(33)SRA
|
SPA-1XCHSTM1/OC3
|
7600-SIP-200
|
1-port Channelized STM1/OC3 to DS0 SPA
|
12.2(33)SRA
|
Circuit Emulation over Packet (CEoP) SPAs
Product ID
(append "=" for spares)
|
SIP Support
|
Product Description
|
Minimum Software Version
|
SPA-1CHOC3-CE-ATM
|
7600-SIP-400
|
1-Port Channelized OC-3 STM1 ATM CEoP SPA
|
12.2(33)SRB
|
| |
SFP Modules Supported in SPA-1XCHOC3-CE
|
| |
SFP-OC3-MM
|
12.2(33)SRB
|
| |
SFP-OC3-IR1
|
12.2(33)SRB
|
| |
SFP-OC3-LR1
|
12.2(33)SRB
|
| |
SFP-OC3-LR2
|
12.2(33)SRB
|
| |
|
SFP-OC3-SR
|
12.2(33)SRB
|
SPA-24CHT1-CE-ATM
|
7600-SIP-400
|
24-Port Channelized T1/E1/J1 ATM CEoP SPA
|
12.2(33)SRB
|
Note The SPA-24CHT1-CE-ATM does not use SFPs, use a Telco connector with a Y cable to connect to a patch panel.
|
Services SPA Carrier (SSC)
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
7600-SSC-400
|
5.43 A@42 V
|
Services SPA Carrier (SSC)
|
12.2(33)SRA
|
Note 7600-SSC-400 does not maintain state when an NSF with SSO redundancy mode switchover occurs.
|
Services SPAs
Product ID
(append "=" for spares)
|
Carrier
|
Product Description
|
Minimum Software Version
|
IPSEC-SPA-2G
|
7600-SSC-400
|
IPSec SPA
|
12.2(33)SRA
|
Enhanced FlexWAN Module
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-X6582-2PA
|
2.50 A@42 V
|
Enhanced FlexWAN Module; CEF256
|
| |
|
With Supervisor Engine 720
|
12.2(33)SRA
|
| |
|
With Supervisor Engine 32
|
12.2(33)SRA
|
Note See the Release Notes for Cisco IOS Release 12.2SR on the Cisco 7600 Series Routers for information about additional procedures required to support WS-X6582-2PA with Cisco IOS Release 12.2(33)SRA and later releases.
|
Enhanced FlexWAN Module Port Adapters
Product ID
(append "=" for spares)
|
Product Description
|
Minimum Software Version
|
PA-2FE-TX, -FX
|
2-port Fast Ethernet port adapter (supported only in WS-X6582-2PA)
|
12.2(33)SRA
|
PA-1FE-TX, -FX
|
1-port Fast Ethernet port adapter (supported only in WS-X6582-2PA)
|
12.2(33)SRA
|
PA-POS-1OC3
|
1-port Packet over SONET OC3c/STM1 port adapter
|
12.2(33)SRA
|
PA-POS-2OC3
|
2-port POS OC3c/STM1 port adapter
|
12.2(33)SRA
|
SFPs for PA-POS-2OC3
|
SFP-OC3-MM
|
Short range, multimode fiber
|
12.2(33)SRA
|
SFP-OC3-IR1
|
Intermediate range, single-mode fiber
|
12.2(33)SRA
|
SFP-OC3-LR1
|
Long range, single-mode fiber
|
12.2(33)SRA
|
PA-A6-OC3MM
|
1-port ATM OC-3c/STM-1 multimode port adapter, enhanced
|
12.2(33)SRA
|
PA-A6-OC3SMI
|
1-port ATM OC-3c/STM-1 single-mode (IR) port adapter, enhanced
|
12.2(33)SRA
|
PA-A6-OC3SML
|
1-port ATM OC-3c/STM-1 single-mode (LR) port adapter, enhanced
|
12.2(33)SRA
|
PA-A6-T3
|
1-port ATM DS3 port adapter, enhanced
|
12.2(33)SRA
|
PA-A6-E3
|
1-port ATM E3 port adapter, enhanced
|
12.2(33)SRA
|
PA-POS-OC3MM
PA-POS-OC3SMI
PA-POS-OC3SML
|
Packet over SONET (OC-3) port adapters
|
12.2(33)SRA
|
PA-A3-OC3MM
PA-A3-OC3SMI
PA-A3-T3
PA-A3-OC3SML
PA-A3-E3
PA-A3-8T1IMA
PA-A3-8E1IMA
|
ATM with traffic shaping port adapters
|
12.2(33)SRA
|
PA-T3
PA-T3+
PA-2T3
PA-2T3+
PA-E3
PA-2E3
PA-MC-T3
PA-MC-E3
PA-MC-2T3+
|
T3/E3 (clear-channel and channelized) port adapters
|
12.2(33)SRA
|
PA-4T+
PA-8T-V35
PA-8T-X21
PA-8T-232
PA-MC-2E1/120
PA-MC-8T1
PA-MC-8E1/120
PA-MC-2T1
PA-MC-4T1
|
T1/E1 port adapters
|
12.2(33)SRA
|
PA-4E1G/75
PA-4E1G/120
|
T1/E1 port adapters
|
12.2(33)SRA
|
PA-MC-8TE1+
|
Multichannel T1/E1 8PRI port adapters
|
12.2(33)SRA
|
PA-H
PA-2H
|
HSSI port adapters
|
12.2(33)SRA
|
PA-MC-STM-1
|
Multichannel STM-1 port adapters
|
12.2(33)SRA
|
Ethernet Services 20G Line Cards
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
7600-ES20-GE3C
|
8.1 A@42 V
|
Cisco 7600 ES20 line card, 20xGE SFP with DFC 3C
|
|
| |
|
With Supervisor Engine 720
|
12.2(33)SRB
|
| |
|
With RSP 720
|
12.2(33)SRB
|
| |
|
SFPs Supported
|
|
| |
|
SFP-GE-S
|
12.2(33)SRB
|
| |
|
SFP-GE-L
|
12.2(33)SRB
|
| |
|
SFP-GE-Z
|
12.2(33)SRB
|
7600-ES20-GE3CXL
|
8.1 A@42 V
|
Cisco 7600 ES20 line card, 20xGE SFP with DFC 3CXL
|
|
| |
|
With Supervisor Engine 720
|
12.2(33)SRB
|
| |
|
With RSP 720
|
12.2(33)SRB
|
| |
|
SFPs Supported
|
|
| |
|
SFP-GE-S
|
12.2(33)SRB
|
| |
|
SFP-GE-L
|
12.2(33)SRB
|
| |
|
SFP-GE-Z
|
12.2(33)SRB
|
7600-ES20-10G3C
|
8.1 A@42 V
|
Cisco 7600 ES20 line card, 2x10GE XFP with DFC 3C
|
| |
|
With Supervisor Engine 720
|
12.2(33)SRB
|
| |
|
With RSP 720
|
12.2(33)SRB
|
| |
|
SFPs Supported
|
|
| |
|
SFP-GE-S
|
12.2(33)SRB
|
| |
|
SFP-GE-L
|
12.2(33)SRB
|
| |
|
SFP-GE-Z
|
12.2(33)SRB
|
7600-ES20-10G3CXL
|
8.1 A@42 V
|
Cisco 7600 ES20 line card, 2x10GE XFP with DFC 3CXL
|
|
| |
|
With Supervisor Engine 720
|
12.2(33)SRB
|
| |
|
With RSP 720
|
12.2(33)SRB
|
| |
|
SFPs Supported
|
|
| |
|
SFP-GE-S
|
12.2(33)SRB
|
| |
|
SFP-GE-L
|
12.2(33)SRB
|
| |
|
SFP-GE-Z
|
12.2(33)SRB
|
Note The Ethernet Services 20G line cards support all Cisco 7600 series routers except for the Cisco 7603 router
|
Service Modules
• Anomaly Guard Module
• Traffic Anomaly Detector Module
• Persistent Storage Device (PSD) Module
• Multi-Processor WAN Application Module (MWAM)
• Content Services Gateway (CSG) Module
• Firewall Services Module
• Intrusion Detection System Modules (IDSMs)
• Network Analysis Modules (NAMs)
• Application Control Engine (ACE) Module
• Service Application Module for IP
Anomaly Guard Module
Traffic Anomaly Detector Module
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-SVC-ADM-1-K9
|
4.00 A@42 V
|
Traffic Anomaly Detector Module
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
Note
•Supervisor Engine 32 does not support WS-SVC-ADM-1-K9.
•WS-SVC-ADM-1-K9 runs its own software—Refer to this publication:
http://www.cisco.com/univercd/cc/td/doc/product/secure/ad_g/jaffa/jaffatad.htm
|
Persistent Storage Device (PSD) Module
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-SVC-PSD-1
|
4.00 A@42 V
|
Persistent Storage Device Module
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
Note
•WS-SVC-PSD-1 runs its own software—See this publication for more information:
• http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_4781.htm
•WS-SVC-PSD-1 maintains state when an NSF with SSO redundancy mode switchover occurs.
|
Multi-Processor WAN Application Module (MWAM)
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-SVC-MWAM-1
|
3.57 A@42 V
|
Multi-Processor WAN Application Module
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
Note
•Supervisor Engine 32 does not support WS-SVC-MWAM-1.
•WS-SVC-MWAM-1 runs its own software—See this publication for more information:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/mwam/index.htm
•WS-SVC-MWAM-1 maintains state when an NSF with SSO redundancy mode switchover occurs.
|
Content Services Gateway (CSG) Module
Firewall Services Module
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-SVC-FWM-1-K9
|
4.09 A@42 V
|
Firewall Services Module; CEF256
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
Note
•Supervisor Engine 32 requires Firewall Services Module Software Release 2.3(3) or a later rebuild.
•WS-SVC-FWM-1-K9 runs its own software—See this publication for more information:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/index.htm
•With Firewall Services Module Software Release 2.3(1), WS-SVC-FWM-1-K9 maintains state when an NSF with SSO redundancy mode switchover occurs.
•WS-SVC-FWM-1-K9 does not maintain state when a single router mode with stateful switchover (SRM with SSO) redundancy mode switchover occurs.
|
Intrusion Detection System Modules (IDSMs)
Network Analysis Modules (NAMs)
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-SVC-NAM-2
|
3.47 A@42 V
|
Network Analysis Module 2; CEF256
|
WS-SVC-NAM-1
|
2.89 A@42 V
|
Network Analysis Module 1; CEF256
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
| |
|
With Supervisor Engine 32
|
12.2(33)SRA
|
Note
•WS-SVC-NAM-2 and WS-SVC-NAM-1 run their own software—See this publication for more information:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/78_15353.htm
•WS-SVC-NAM-2 and WS-SVC-NAM-1 have been tested with OSM-2+4GE-WAN+ and the OC-12 Packet-over-SONET OSMs.
|
Application Control Engine (ACE) Module
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
ACE10-6500-K9
|
5.23 A@42 V
|
Application Control Engine (ACE) module
|
| |
|
With Supervisor Engine 720
|
12.2(33)SRB
|
•ACE10-6500-K9 runs its own software—See these publications:
•http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/ace/index.htm
•See the ACE10-6500-K9 software release notes for information about the minimum required ACE10-6500-K9 software version.
|
Note
•Cisco IOS Software modularity does not support ACE10-6500-K9.
•Supervisor Engine 32 does not support ACE10-6500-K9.
|
Service Application Module for IP
Product ID
(append "=" for spares)
|
Power
Required
|
Product Description
|
Minimum Software Version
|
WS-SVC-SAMI-BB
|
7.14 A@42 V
|
Cisco Service and Application Module IP
|
| |
|
With Supervisor Engine 720-3BXL
|
12.2(33)SRB
|
Fan Trays
Note The fan trays required by the Supervisor Engine 720 are supported only with the power supplies listed in the " WS-C6503, WS-C6503-E, and CISCO7603 Power Supplies" and " CISCO7603-S Power Supplies" sections.
Note Enter the show environment status | include fan command or the show environment cooling command to display information about the installed fan trays.
High-Capacity Fan Trays
These high-capacity fan trays support the Supervisor Engine 720.
Product ID
(append "=" for spares)
|
Power
Allocated at 42 V
|
Product Description
|
Minimum
Software
Version
|
WS-C6503-E-FAN
|
1.37 A@42 V
|
High-capacity fan tray for WS-C6503-E chassis
|
12.2(33)SRA
|
FAN-MOD-3HS
|
2.98 A@42 V
|
High-capacity fan tray for WS-C6503 and CISCO7603 chassis
|
12.2(33)SRA
|
FAN-MOD-6HS
|
4.29 A@42 V
|
High-capacity fan tray for CISCO7606 chassis
|
12.2(33)SRA
|
WS-C6506-E-FAN
|
2.35 A@42 V
|
High-capacity fan tray for WS-C6506-E chassis
|
12.2(33)SRA
|
WS-C6K-6SLOT-FAN2
|
12 V fan
|
High-capacity fan tray for WS-C6506 chassis
|
12.2(33)SRA
|
FAN-MOD-09
|
5.75 A@42 V
|
High-capacity fan tray for WS-C6509-NEB-A and CISCO7609 chassis
|
12.2(33)SRA
|
WS-C6509-E-FAN
|
3.58 A@42 V
|
High-capacity fan tray for WS-C6509-E chassis
|
12.2(33)SRA
|
WS-C6K-9SLOT-FAN2
|
12 V fan
|
High-capacity fan tray for WS-C6509 chassis
|
12.2(33)SRA
|
WS-C6K-13SLT-FAN2
|
7.10 A@42 V
|
High-capacity fan tray for WS-C6513 and CISCO7613 chassis
|
12.2(33)SRA
|
Power Supplies
• CISCO7606 Power Supplies
• CISCO7606-S Power Supplies
• WS-C6504-E and CISCO7604 Power Supplies
• WS-C6503, WS-C6503-E, and CISCO7603 Power Supplies
• CISCO7603-S Power Supplies
• CISCO7603-S Power Supplies
Product ID
(append "=" for spares)
|
Product Description
|
Minimum Software Version
|
PWR-1900-AC/6
|
1900 W AC power supply
|
12.2(33)SRA
|
PWR-2700-AC
|
2700 W AC power supply
|
12.2(33)SRA
|
PWR-2700-DC
|
2700 W DC power supply
|
12.2(33)SRA
|
Product ID
(append "=" for spares)
|
Product Description
|
Minimum Software Version
|
PWR-2700-AC
|
2700 W AC power supply
|
12.2(33)SRB1
|
PWR-2700-DC
|
2700 W DC power supply
|
12.2(33)SRB1
|
Product ID
(append "=" for spares)
|
Product Description
|
Minimum Software Version
|
PWR-2700-DC/4
|
2700 W DC power supply
|
12.2(33)SRA
|
Product ID
(append "=" for spares)
|
Product Description
|
Minimum Software Version
|
PWR-1400-AC
|
1400 W AC power supply
|
12.2(33)SRA
|
PWR-950-AC
|
950 W AC power supply
|
12.2(33)SRA
|
PWR-950-DC
|
950 W DC power supply
|
12.2(33)SRA
|
CISCO7603-S Power Supplies
Product ID
(append "=" for spares)
|
Product Description
|
Minimum Software Version
|
PWR-1500-DC
|
1500 W DC input (PWR-1500-DC)
|
12.2(33)SRB1
|
All Other Power Supplies
Product ID
(append "=" for spares)
|
Product Description
|
Minimum Software Version
|
WS-CAC-6000W
|
6000 W AC power supply
Note Limited to 4,000 W in WS-C6509 and WS-C6506.
|
12.2(18)SXD
|
PWR-4000-DC
|
4000 W DC power supply
|
12.2(33)SRA
|
WS-CAC-4000W
|
4000 W AC power supply
|
12.2(33)SRA
|
+WS-CAC-3000W
|
3000 W AC power supply
Note
•Required with Supervisor Engine 720 in WS-C6509-NEB or OSR7609.
•Included in the WS-6509-NEB-UPGRD= upgrade kit.
|
12.2(33)SRA
|
WS-CAC-3000W
|
3000 W AC power supply
|
12.2(33)SRA
|
WS-CAC-2500W
|
2500 W AC power supply
|
12.2(33)SRA
|
WS-CDC-2500W
|
2500 W DC power supply
|
12.2(33)SRA
|
PWR-6000-DC
|
6000 W DC power supply
|
12.2(33)SRB
|
Chassis
• 13-Slot Chassis
• 9-Slot Chassis
• 6-Slot Chassis
• 4-Slot Chassis
• 3-Slot Chassis
Note Cisco IOS Release 12.2SR is developed for and intended to run on Cisco 7600 series routers. If you are interrested in running this release on Cisco Catalyst 6500 series switches, contact your account team.
13-Slot Chassis
Product ID
(append "=" for spare)
|
Product Description
|
Minimum Software Version
|
WS-C6513
|
Catalyst 6513 chassis:
•13 slots
•64 chassis MAC addresses
•Use with Supervisor Engine 720 requires WS-C6K-13SLT-FAN2
•Does not support WS-C6500-SFM
•These modules are supported only in slots 9 through 13 and do not power up in other slots:
– WS-X6704-10GE
– WS-X6748-SFP
– WS-X6816-GBIC
– WS-X6748-GE-TX
|
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
CISCO7613
|
Cisco 7613 chassis:
•13 slots
•64 chassis MAC addresses
•Use with Supervisor Engine 720 requires WS-C6K-13SLT-FAN2
•Does not support WS-C6500-SFM
•These modules are supported only in slots 9 through 13 and do not power up in other slots:
– WS-X6704-10GE
– WS-X6748-SFP
– WS-X6816-GBIC
– WS-X6748-GE-TX
|
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
| |
With Route Switch Processor 720
|
12.2(33)SRB
|
9-Slot Chassis
Product ID
(append "=" for spare)
|
Product Description
|
Minimum Software Version
|
WS-C6509-E
|
Catalyst 6509 chassis:
•9 horizontal slots
•1024 chassis MAC addresses
•Requires WS-C6509-E-FAN
•Requires 2500 W or higher power supply
|
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-C6509
|
Catalyst 6509 chassis:
•9 horizontal slots
•1024 chassis MAC addresses
•Use with Supervisor Engine 720 requires WS-C6K-9SLOT-FAN2
• WS-CAC-6000W limited to 4000 W in WS-C6509
|
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-C6509-NEB-A
|
Catalyst 6509-NEB chassis
•9 vertical slots
•64 chassis MAC addresses
•No fan tray upgrade required for use with Supervisor Engine 720
|
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
CISCO7609
|
Cisco 7609 chassis
•9 vertical slots
•64 chassis MAC addresses
•No fan tray upgrade required for use with Supervisor Engine 720
|
| |
With Supervisor Engine 720
|
12.2(33)SRA
|
| |
With Supervisor Engine 32
|
12.2(33)SRA
|
| |
With Route Switch Processor 720
|
12.2(33)SRB
|
CISCO7609-S
|
Cisco 7609-S chassis
•9 vertical slots
•64 chassis MAC addresses
•FAN-MOD-9SHS high-speed fan module
•No fan tray upgrade required for use with Supervisor Engine 720
|
| |
With Supervisor Engine 720
|
12.2(33)SRB
|
| |
With Supervisor Engine 32
|
12.2(33)SRB
|
| |
With Route Switch Processor 720
|
12.2(33)SRB
|
6-Slot Chassis
Product ID
(append "=" for spare)
|
Product Description
|
Minimum Software Version
|
WS-C6506-E
|
Catalyst 6506 chassis:
•6 slots
•1024 chassis MAC addresses
•Requires WS-C6506-E-FAN
•Requires 2500 W or higher power supply
|
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
WS-C6506
|
Catalyst 6506 chassis:
•6 slots
•1024 chassis MAC addresses
•Use with Supervisor Engine 720 requires WS-C6K-6SLOT-FAN2
• WS-CAC-6000W limited to 4000 W in WS-C6506
|
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
CISCO7606
|
Cisco 7606 chassis:
•6 slots
•64 chassis MAC addresses
•Use with Supervisor Engine 720 requires FAN-MOD-6HS
|
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
| |
With Route Switch Processor 720
|
12.2(33)SRB
|
CISCO7606-S
|
Cisco 7606-S chassis
•6 vertical slots
•64 chassis MAC addresses
•FAN-MOD-6SHS high-speed fan module
•No fan tray upgrade required for use with Supervisor Engine 720
|
| |
With Supervisor Engine 720
|
12.2(33)SRB1
|
| |
With Supervisor Engine 32
|
12.2(33)SRB1
|
| |
With Route Switch Processor 720
|
12.2(33)SRB1
|
4-Slot Chassis
Product ID
(append "=" for spare)
|
Product Description
|
Minimum Software Version
|
WS-C6504-E
|
Catalyst 6504-E chassis:
•4 slots
•64 chassis MAC addresses
•Does not support:
– WS-X6500-SFM2
– WS-C6500-SFM
– WS-F6K-DFC
|
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
CISCO7604
|
Cisco 7604 chassis:
•4 slots
•64 chassis MAC addresses
•Does not support:
– WS-X6500-SFM2
– WS-C6500-SFM
– WS-F6K-DFC
|
With Supervisor Engine 720:
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
| |
With Route Switch Processor 720
|
12.2(33)SRB
|
3-Slot Chassis
Product ID
(append "=" for spare)
|
Product Description
|
Minimum Software Version
|
WS-C6503-E
|
•3 slots
•64 chassis MAC addresses
•Use with Supervisor Engine 720 requires WS-C6503-E-FAN
•WS-C6503-E supports:
– WS-X6704-10GE
– WS-X6748-SFP
– WS-X6724-SFP
– WS-X6748-GE-TX
•WS-C6503-E does not support:
– WS-X6500-SFM2
– WS-C6500-SFM
– WS-F6K-DFC
|
With Supervisor Engine 720
|
12.2(33)SRA
|
With Supervisor Engine 32
|
12.2(33)SRA
|
CISCO7603-S
|
Cisco 7603-S chassis
•3 slots
•64 chassis MAC addresses
•FAN-MOD-3SHS high-speed fan module
•No fan tray upgrade required for use with Supervisor Engine 720
|
| |
With Supervisor Engine 720
|
12.2(33)SRB1
|
| |
With Supervisor Engine 32
|
12.2(33)SRB1
|
| |
With Route Switch Processor 720
|
12.2(33)SRB1
|
Unsupported Hardware
The following hardware is not supported:
•See the "Supervisor Engine 32" section for information about hardware that is not supported with the Supervisor Engine 32.
•1000BASE-BX10 SFP (GLC-BX-U, GLC-BX-U)
•With a Supervisor Engine 720, WS-X6516-GBIC hardware revisions 5.0 through 5.4 with a DFC3 installed.
Supervisor Engine 720 supports a DFC3 on these WS-X6516-GBIC hardware revisions:
–Lower than 5.0
–5.5 and higher
With a Supervisor Engine 720 and a DFC3 installed, WS-X6516-GBIC hardware revisions 5.0 through 5.3 do not power up. Without a DFC3, WS-X6516-GBIC hardware revisions 5.0 through 5.4 operate in bus mode.
Refer to external field notice 24494 for more information:
http://www.cisco.com/warp/public/770/fn24494.shtml
Additionally, the following hardware is not supported:
Unsupported Service Modules
•WS-X6381-IDS—Intrusion Detection System (IDS) Module
•WS-X6380-NAM—Network Analysis Module (NAM)
•WS-SVC-WLAN-1-K9—Wireless LAN Service Module
•WS-SVC-IPSEC-1—IPsec VPN Acceleration Services Module
•WS-SVC-WEBVPN-K9—WebVPN Services Module
•WS-SVC-CMM—Communication Media Module
•WS-X6066-SLB-S-K9—Content Switching Module with SSL (CSM-S)
•WS-X6066-SLB-APC—Content Switching Module (CSM)
•WS-SVC-AON-1-K9—Application-Oriented Networking Module (AON)
•WS-SVC-SSL-1—Secure Sockets Layer (SSL) Services Module
Unsupported Port Adapters
–WS-SVC-CMM-24FXS—24-Port FXS Interface Port Adapter
–WS-SVC-CMM-ACT—Adhoc Conferencing and Transcoding Port Adapter
–WS-SVC-CMM-6T1—6-Port T1 Interface Port Adapter
–WS-SVC-CMM-6E1—6-Port E1 Interface Port Adapter
Unsupported Supervisor Engines
•Supervisor Engine 1 (WS-X6K-S1A-MSFC2, WS-X6K-SUP1A-MSFC)
•Supervisor Engine 2 (WS-X6K-S2U-MSFC2, WS-X6K-S2-MSFC2)
Unsupported Policy Feature Cards and Distributed Forwarding Cards
•PFC2
•PFC3A (WS-F6K-PFC3A)
•DFC3A (WS-F6700-DFC3A )
Unsupported Line Cards
•FlexWAN module (WS-X6182-2PA)
•OSM-4GE-WAN-GBIC
•OSM-1OC48-POS-SS, SI, SL
•OSM-4OC12-POS-MM, SI, SL
•OSM-2OC12-POS-MM, SI, SL
•OSM-16OC3-POS-MM, SI, SL
•OSM-8OC3-POS-MM, SI, SL
•OSM-4OC3-POS-SI
•OSM-2OC12-ATM-MM, SI
Unsupported Service Modules
•WS-X6624-FXS, WS-X6608-T1, and WS-X6608-E1 voice modules
•WS-X6101-OC12-MMF and WS-X6101-OC12-SMF ATM LANE modules
•WS-X6302-MSM—Multilayer Switch Module
Unsupported Chassis
•Catalyst 6000 series chassis
•WS-C6509-NEB—Catalyst 6509-NEB chassis
•OSR-7609—Cisco 7609 chassis
•CISCO7603—Cisco 7603 chassis
•WS-C6503—Catalyst 6503 chassis
Unsupported Power Supplies
These power supplies cannot support high-capacity fan trays:
–WS-CAC-1300W
–WS-CDC-1300W
–WS-CAC-1000W
Note Unsupported modules remain powered down if detected and do not affect system behavior.
Related Documentation
The following publications are available for the Cisco 7600 series routers:
•Cisco 7600 Series Router Installation Guide
•Cisco 7600 Series Router Module Installation Guide
•Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
•Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide
•Cisco 7600 Series Router Cisco IOS Command Reference
•Cisco 7600 Series Internet Router System Message Guide
•Release Notes for Cisco IOS Release 12.2SRA on the Cisco 7600 Series Routers
•Cisco IOS Configuration Guides and Command References—Use these publications to help you configure Cisco IOS software features not described in the Cisco 7600 series router publications:
–Configuration Fundamentals Configuration Guide
–Configuration Fundamentals Command Reference
–Bridging and IBM Networking Configuration Guide
–Bridging and IBM Networking Command Reference
–Interface Configuration Guide
–Interface Command Reference
–Network Protocols Configuration Guide, Parts 1, 2, and 3
–Network Protocols Command Reference, Parts 1, 2, and 3
–Security Configuration Guide
–Security Command Reference
–Switching Services Configuration Guide
–Switching Services Command Reference
–Voice, Video, and Home Applications Configuration Guide
–Voice, Video, and Home Applications Command Reference
–Software Command Summary
–Software System Error Messages
–Debug Command Reference
–Internetwork Design Guide
–Internetwork Troubleshooting Guide
–Configuration Builder Getting Started Guide
The Cisco IOS Configuration Guides and Command References are located at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/index.htm
•For information about MIBs, go to this URL:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtmlObtaining Documentation
Cisco documentation and additional literature are available on Cisco.com. This section explains the product documentation resources that Cisco offers.
Cisco.com
You can access the most current Cisco documentation at this URL:
http://www.cisco.com/techsupport
You can access the Cisco website at this URL:
http://www.cisco.com
You can access international Cisco websites at this URL:
http://www.cisco.com/public/countries_languages.shtml
Product Documentation DVD
The Product Documentation DVD is a library of technical product documentation on a portable medium. The DVD enables you to access installation, configuration, and command guides for Cisco hardware and software products. With the DVD, you have access to the HTML documentation and some of the PDF files found on the Cisco website at this URL:
http://www.cisco.com/univercd/home/home.htm
The Product Documentation DVD is created and released regularly. DVDs are available singly or by subscription. Registered Cisco.com users can order a Product Documentation DVD (product number DOC-DOCDVD= or DOC-DOCDVD=SUB) from Cisco Marketplace at the Product Documentation Store at this URL:
http://www.cisco.com/go/marketplace/docstore
Ordering Documentation
You must be a registered Cisco.com user to access Cisco Marketplace. Registered users may order Cisco documentation at the Product Documentation Store at this URL:
http://www.cisco.com/go/marketplace/docstore
If you do not have a user ID or password, you can register at this URL:
http://tools.cisco.com/RPF/register/register.do
Documentation Feedback
You can provide feedback about Cisco technical documentation on the Cisco Support site area by entering your comments in the feedback form available in every online document.
Cisco Product Security Overview
Cisco provides a free online Security Vulnerability Policy portal at this URL:
http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html
From this site, you will find information about how to do the following:
•Report security vulnerabilities in Cisco products
•Obtain assistance with security incidents that involve Cisco products
•Register to receive security information from Cisco
A current list of security advisories, security notices, and security responses for Cisco products is available at this URL:
http://www.cisco.com/go/psirt
To see security advisories, security notices, and security responses as they are updated in real time, you can subscribe to the Product Security Incident Response Team Really Simple Syndication (PSIRT RSS) feed. Information about how to subscribe to the PSIRT RSS feed is found at this URL:
http://www.cisco.com/en/US/products/products_psirt_rss_feed.html
Reporting Security Problems in Cisco Products
Cisco is committed to delivering secure products. We test our products internally before we release them, and we strive to correct all vulnerabilities quickly. If you think that you have identified a vulnerability in a Cisco product, contact PSIRT:
•For emergencies only — security-alert@cisco.com
An emergency is either a condition in which a system is under active attack or a condition for which a severe and urgent security vulnerability should be reported. All other conditions are considered nonemergencies.
•For nonemergencies — psirt@cisco.com
In an emergency, you can also reach PSIRT by telephone:
•1 877 228-7302
•1 408 525-6532
Tip We encourage you to use Pretty Good Privacy (PGP) or a compatible product (for example, GnuPG) to encrypt any sensitive information that you send to Cisco. PSIRT can work with information that has been encrypted with PGP versions 2.x through 9.x.
Never use a revoked encryption key or an expired encryption key. The correct public key to use in your correspondence with PSIRT is the one linked in the Contact Summary section of the Security Vulnerability Policy page at this URL:
http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html
The link on this page has the current PGP key ID in use.
If you do not have or use PGP, contact PSIRT to find other means of encrypting the data before sending any sensitive material.
Product Alerts and Field Notices
Modifications to or updates about Cisco products are announced in Cisco Product Alerts and Cisco Field Notices. You can receive these announcements by using the Product Alert Tool on Cisco.com. This tool enables you to create a profile and choose those products for which you want to receive information.
To access the Product Alert Tool, you must be a registered Cisco.com user. Registered users can access the tool at this URL:
http://tools.cisco.com/Support/PAT/do/ViewMyProfiles.do?local=en
To register as a Cisco.com user, go to this URL:
http://tools.cisco.com/RPF/register/register.do
Obtaining Technical Assistance
Cisco Technical Support provides 24-hour-a-day award-winning technical assistance. The Cisco Support website on Cisco.com features extensive online support resources. In addition, if you have a valid Cisco service contract, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not have a valid Cisco service contract, contact your reseller.
Cisco Support Website
The Cisco Support website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The website is available 24 hours a day at this URL:
http://www.cisco.com/en/US/support/index.html
Access to all tools on the Cisco Support website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a user ID or password, you can register at this URL:
http://tools.cisco.com/RPF/register/register.do
Note Before you submit a request for service online or by phone, use the Cisco Product Identification Tool to locate your product serial number. You can access this tool from the Cisco Support website by clicking the Get Tools & Resources link, clicking the All Tools (A-Z) tab, and then choosing Cisco Product Identification Tool from the alphabetical list. This tool offers three search options: by product ID or model name; by tree view; or, for certain products, by copying and pasting show command output. Search results show an illustration of your product with the serial number label location highlighted. Locate the serial number label on your product and record the information before placing a service call.
Tip Displaying and Searching on Cisco.com
If you suspect that the browser is not refreshing a web page, force the browser to update the web page by holding down the Ctrl key while pressing F5.
To find technical information, narrow your search to look in technical documentation, not the entire Cisco.com website. After using the Search box on the Cisco.com home page, click the Advanced Search link next to the Search box on the resulting page and then click the Technical Support & Documentation radio button.
To provide feedback about the Cisco.com website or a particular technical document, click Contacts & Feedback at the top of any Cisco.com web page.
Submitting a Service Request
Using the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3 and S4 service requests are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Service Request Tool provides recommended solutions. If your issue is not resolved using the recommended resources, your service request is assigned to a Cisco engineer. The TAC Service Request Tool is located at this URL:
http://www.cisco.com/techsupport/servicerequest
For S1 or S2 service requests, or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.
To open a service request by telephone, use one of the following numbers:
Asia-Pacific: +61 2 8446 7411
Australia: 1 800 805 227
EMEA: +32 2 704 55 55
USA: 1 800 553 2447
For a complete list of Cisco TAC contacts, go to this URL:
http://www.cisco.com/techsupport/contacts
Definitions of Service Request Severity
To ensure that all service requests are reported in a standard format, Cisco has established severity definitions.
Severity 1 (S1)—An existing network is "down" or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.
Severity 2 (S2)—Operation of an existing network is severely degraded, or significant aspects of your business operations are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.
Severity 3 (S3)—Operational performance of the network is impaired while most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.
Severity 4 (S4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.
Obtaining Additional Publications and Information
Information about Cisco products, technologies, and network solutions is available from various online and printed sources.
•The Cisco Online Subscription Center is the website where you can sign up for a variety of Cisco e-mail newsletters and other communications. Create a profile and then select the subscriptions that you would like to receive. To visit the Cisco Online Subscription Center, go to this URL:
http://www.cisco.com/offer/subscribe
•The Cisco Product Quick Reference Guide is a handy, compact reference tool that includes brief product overviews, key features, sample part numbers, and abbreviated technical specifications for many Cisco products that are sold through channel partners. It is updated twice a year and includes the latest Cisco channel product offerings. To order and find out more about the Cisco Product Quick Reference Guide, go to this URL:
http://www.cisco.com/go/guide
•Cisco Marketplace provides a variety of Cisco books, reference guides, documentation, and logo merchandise. Visit Cisco Marketplace, the company store, at this URL:
http://www.cisco.com/go/marketplace/
•Cisco Press publishes a wide range of general networking, training, and certification titles. Both new and experienced users will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press at this URL:
http://www.ciscopress.com
•Internet Protocol Journal is a quarterly journal published by Cisco for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL:
http://www.cisco.com/ipj
•Networking products offered by Cisco, as well as customer support services, can be obtained at this URL:
http://www.cisco.com/en/US/products/index.html
•Networking Professionals Connection is an interactive website where networking professionals share questions, suggestions, and information about networking products and technologies with Cisco experts and other networking professionals. Join a discussion at this URL:
http://www.cisco.com/discuss/networking
•"What's New in Cisco Documentation" is an online publication that provides information about the latest documentation releases for Cisco products. Updated monthly, this online publication is organized by product category to direct you quickly to the documentation for your products. You can view the latest release of "What's New in Cisco Documentation" at this URL:
http://www.cisco.com/univercd/cc/td/doc/abtunicd/136957.htm
•World-class networking training is available from Cisco. You can view current offerings at this URL:
http://www.cisco.com/en/US/learning/index.html
